Search results for 'an'
-
BRF - Roof Fan
Excl. Tax: € 105.68 Incl. Tax: € 129.99The mounting plate and fan cap of the BRF series horizontal discharge centrifugal fans are made of electrostatic powder-coated sheet metal. The fan wheels of the BRF models are made of high-quality galvanized sheet steel resistant to corrosion. All models have an external rotor motor with a closed structure. The device is capable of handling air at max. 40ºC.
-
SWQ 1500 PRO flood pump
Excl. Tax: € 325.20 Incl. Tax: € 399.99Professional submersible pump compliant with the most demanding European standards, intended for customers using drainage pumps in their professional work. Due to the use of a closed impeller, the pump can pump clean and slightly contaminated water. With its 1500 W motor, 3-inch outlet, and maximum flow of up to 1400l/min, as well as a relatively low weight, the pump can be used to drain flooded houses, premises and garages during minor and major flooding. The pump is equipped with a float switch for operation control and thermal protection mounted in the motor winding.
Learn More -
Grundfos Scala1 5-55 Pump
Excl. Tax: € 599.99 Incl. Tax: € 599.99The Grundfos SCALA1 is a self-priming, multistage pump, that incorporates all the components of a pressure booster into a compact composite enclosure. As it is self-priming, the SCALA1 can pump water from a level below the pump. Provided it is filled with water, the pump can lift water from a depth of 8 m in less than 5 minutes. This facilitates easy installation and start-up of the pump and provides more reliable water supply in installations where there is a risk of dry running and leakages in suction hose or pipes.
Learn More -
AMG circulation pump
The pumps are designed to force circulation in systems equipped with an electronic processor, which automatically controls the operation of the pumps. This feature, in combination with a frequency converter, allows for significant savings in electricity consumption. This solution is used in central heating and solar installations. The equipped processor enables the pump to choose one of 8 modes of operation as needed per installation. The power consumption is from 1/10 to 1/3 lower than in classic pumps. The pump set includes a set of screw connections and a power cord.
Learn More -
ANDRIS ELITE 30 EU
Excl. Tax: € 227.63 Incl. Tax: € 279.99The Andris Elite EU from Ariston is a small unvented electric water heater, encompassing leading Italian design, energy efficiency, durability, usability and safety. Andris Elite EU is perfect for a variety of specification-led locations, including commercial properties, building sites, kitchens, bathrooms or offices.
Learn More -
Submersible pump WQF
Excl. Tax: € 81.29 Incl. Tax: € 99.99Submersible pumps designed for pumping sewage, dirty water, and water from flooded premises. The pumps are equipped with float switches for automatic pump control. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. WQF pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of AISI304 stainless steel, and the impeller is made of grey cast iron.
Learn More -
Guide rail system
Excl. Tax: € 97.55 Incl. Tax: € 119.99The coupling set is intended for easy and quick removal of the ZWQ, MWQ, Kraken 1800DF pump from the sewage sump (e.g. for periodic inspection or failure). The pump is lowered on a chain along pipe guides to the coupling body, which enables connection and disconnection of the pump with the discharge pipeline. The pump is not connected to the coupling body by a permanent connection and does not require any disassembly. The pump must be equipped with a horizontal connection ending with an orifice.
Learn More -
MWQ pump with AGITATOR
Excl. Tax: € 211.37 Incl. Tax: € 259.99A series of professional submersible pumps with mixing system, designed for customers who need a strong and reliable product in their professional work. These pumps are widely used in sewage pumping stations. MWQ pumps are designed for pumping raw sewage from pumping stations where dense sludge may be deposited. The pumps have a special additional external rotor (agitator) for mixing and splitting heavy sludge. Materials used guarantee long-term and faultless operation. Motor shaft is made of stainless steel. Motor chamber is sealed with a double SiC/ SiC mechanical seal. The pump uses a multi-channel impeller for pumping large diameter impurities. All MWQ pumps are suitable for installation with a guide rail system. The motors have Class F winding insulation and single-phase versions are additionally equipped with thermal protection mounted in the winding. The pumps have bearings manufactured by NSK in Japan. Flanges for connecting pipes or fast-connection. The pumps are available as single-phase 230V ~/ 50Hz versions with a float switch, and 3-phase 400V ~ 3 / 50Hz version. The pumps can be supplied with guide rail systems for installation in pump stations. The guide rail system is sold separately.
Learn More -
BLACK SLIDE 0,6mm CHIMNEY COWL
Excl. Tax: € 97.55 Incl. Tax: € 119.99Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
BLACK B 0,6mm CHIMNEY COWL
Excl. Tax: € 146.33 Incl. Tax: € 179.99Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
BLACK 0,6mm CHIMNEY COWL
Excl. Tax: € 130.07 Incl. Tax: € 159.99Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
IPML Circulation Pump
Excl. Tax: € 284.54 Incl. Tax: € 349.99Pumps designed for constant or variable flow water supply systems with the medium temperature not exceeding 100°C (80°C) and the pressure not exceeding 0.6 MPa. Pumps are most often used in heating and cooling systems. The smallest of the series, the IPML 25/125 pump can also be used to fill solar systems. The IPML 50/1100 and 50/2200 water circulation pumps are intended for water containing non-abrasive and non-absorbent solid impurities of 0.27 kg/m3.
Learn More -
Slurry pump SWQ
Excl. Tax: € 81.29 Incl. Tax: € 99.99Submersible pumps designed for pumping clean and slightly contaminated water.Due to the top quality stainless steel design, the pumps ensure long-term and reliable operation. The motor is equipped with thermal protection mounted in the winding.The pumps have a cooling jacket so that they do not have to be fully submerged.Compared to other SWQ pumps, the F marked pump provides a very high flow of up to 830 l/min. All pumps except the SWQ180 have impellers made of stainless steel and are equipped with float switches for operation control. Due to small size (12 cm diameter), the SWQ180 pumps can be used to extract water from small, narrow wells. The pumps do not have a float.
Learn More -
Deep well pump M79913
Excl. Tax: € 89.42 Incl. Tax: € 109.99The deep well screw pump is ideal for use in single and multi-family houses, recreational plots, farms, production plants, it is perfect for irrigation. Designed for pumping water from drilled deep water intakes, ring wells and free-standing tanks. Learn More
-
Slurry Pump M79910
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
Slurry Pump M79909
Excl. Tax: € 109.75 Incl. Tax: € 134.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
MHI Surface Pump
Excl. Tax: € 117.88 Incl. Tax: € 144.99Group of multi-stage self-priming centrifugal pumps designed for pumping of clean cold water from own intakes and for increasing pressure.The pumps are equipped with the Venturi tube system for increased suction capacity. MHI pumps are available in two variants: with stainless steel impellers (INOX design) or with noryl impellers. All pumps have a stainless steel body. Due to low-noise operation, the pumps can be installed inside the houses. The pumps are equipped with thermal protection mounted in the motor winding.
Learn More -
Chimney pot - Flatline Regular
Chimney pot - Flatline Regular - thanks to its dimensions it can be used both in one- and multi-row air-ducts in the process of natural ventilation. The pot can be fixed separately on mounting adapter or on chimney cap which provides sealing security. The ring structure of the pot allows to generate efficient draught in the air-duct in the process of natural ventilation.The chimney pot is made of high-quality PP material, dyed in the mass with stabilizers that make it resistant to UV. Thanks to which it guarantees high resistance to weather conditions and prevents color loss.
Learn More -
Chimney pot - Flatline Basic
Chimney pot - Flatline Basic- thanks to its dimensions it can be used both in one- and multi-row air-ducts in the process of natural ventilation. The pot can be fixed separately on mounting adapter or on chimney cap which provides sealing security. The ring structure of the pot allows to generate efficient draught in the air-duct in the process of natural ventilation.The chimney pot is made of high-quality PP material, dyed in the mass with stabilizers that make it resistant to UV. Thanks to which it guarantees high resistance to weather conditions and prevents color loss.
Learn More -
JA50 Swimming pool pump
Excl. Tax: € 121.94 Incl. Tax: € 149.99The SPA pump is designed for circulation or filtration of swimming pools, spas, whirlpool bathtubs and hot tub spas. The JA pump can also be used in pools containing sea water, e.g. fish farms. The pump motor is equipped with thermal protection and provides exceptionally low-noise operation and low vibrations. The JA50 pumps are widely used by SPA manufacturers.
Learn More -
WZI / QB Surface Pump
Excl. Tax: € 60.97 Incl. Tax: € 74.99Single-stage self-priming peripheral surface pumps for pumping of clean cold water from own intakes and for increasing pressure. Pump impellers are made of brass. The pump body is made of durable cast iron with the built-in non-return valve. The pump motor is provided with thermal protection. The pumps have a power cable with a plug.
Learn More -
Sewage Pump V
Excl. Tax: € 105.68 Incl. Tax: € 129.99Submersible pumps with cutting system designed for pumping domestic sewage. In case of flooding, they can be used for draining rooms. Their robust design and quality materials used (stainless steel, cast iron), the cutting system with a cutting knife, and very reasonable price have made the pumps very popular among individual customers. The pumps are equipped with a float switch for automatic operation. To ensure reliable operation, the pumps have overload protection mounted on the cable. V 550, V1500 and V2200 pumps incorporate the high efficiency “screw” cutting system. Pump outlet provides connection of the discharge hose with a hose clamp or fast-connection.
Learn More -
UV Sterilizer
Excl. Tax: € 101.62 Incl. Tax: € 124.99UV sterilizers are used to purify/disinfect water from bacteriological contamination that may exist in water sources, e.g. shallow wells or surface intakes. Disinfection is based on the bactericidal effect of the UV lamps in the sterilizer. The principle of their bactericide action is the absorption of UV light by the DNA structures of microorganisms. Proper selection of UV rays strength and exposure time can kill almost all microorganisms by destroying their DNA.
Learn More -
Non-Return Valve
Excl. Tax: € 8.12 Incl. Tax: € 9.99The check valve is used to ensure fluid flow in one direction only. Example application: The non-return valve installed at the end of the suction pipe together with the suction basket and inserted into the well, after switching off the pump, prevents the water remaining in the pipe from flowing down, and thus protects the pump against dry running at the next start-up. Installed directly above the hydrophore pump, it protects against the impact of the backflowing liquid.
Learn More -
Pressure Regulator
Excl. Tax: € 16.25 Incl. Tax: € 19.99Brass regulators designed to regulate input pressure in water and air systems. They also protect the systems against pressure spikes. Compact size and low-noise operation. Pressure regulators are available in sets with pressure gauges.
Learn More -
IBO I-003 Magnetic filter
Excl. Tax: € 73.16 Incl. Tax: € 89.99The Magnetic Filter has been designed to retain impurities in central heating systems.Modern systems equipped with highly efficient systems powered by boilers are exposed to failures and reduced efficiency and effectiveness work through contamination with iron oxides, i.e. the main component of rust, which are formed as a result of corrosion and deposited in the form of sediment. Iron oxide particles circulate throughout the heating circuit, accumulating in critical points of the installation and exposing the entire system to failure e.g. pumps, valves or heat exchangers, and the heating efficiency of the boiler itself decreases, which translates into increased heating costs. The use of magnetic filters/dirt separators makes it possible to increase the protection of the entire heating system by removal of most solid contaminants, which include iron or iron oxides suspended in the heating system fluid. Filters can be used in systems with continuous circulation of the heating medium. The heating medium may consist of a water solution and glycol, where the glycol content does not exceed 50%. Filters can also be used in solar and refrigeration systems by stopping additional impurities such as sand.
-
WZI AUTO 900 Pump
Excl. Tax: € 227.63 Incl. Tax: € 279.99WZI-AUTO 900 is a compact device designed to provide households with clean water from their own water intakes (wells) or to increase pressure from the water supply network. The pumps are equipped with a frequency inverter that guarantees constant pressure in all water taps, soft starts of the motor and lower current consumption compared to classical pressure boosting plants. The pumps with an integrated frequency inverter are state-of-the-art and energy efficient devices characterised by their silent operation, ease of installation and use, integrated protection against dry running, water hammer, pressure decrease or increase, or motor overload.
Learn More -
MAGI H circulation pump
The MAGI circulating pump is equipped with a permanent magnet motor and a pressure differences regulator for automatic and continuous pump capacity adjustment to the actual requirements of the system. The pump control panel is located on top of the motor for easier operation by the user. Current power consumption is displayed on its panel.The pump is supplied with union joints and cable adapter
Learn More -
BETA 2 circulating pump
The BETA 2 pumps are designed for forcing circulation in central heating systems and solar systems. The pumps are equipped with an electronic processor for automatic pump control, which together with a frequency converter allows for significant energy savings. The processor provides 11 operating modes depending on the system requirements. The power consumption is from 1/10 to 1/3 of conventional pumps.The pump is supplied with union joints and power cable.
Learn More -
GFK gravity backdraft damper
Excl. Tax: € 28.45 Incl. Tax: € 34.99GFK - gravity backdraft damper to prevent air back draft in the system. Such fan configuration that includes KFK mixing chamber and GFK backdraft damper ensures fan motor overheating protection based on BY-PASS actuation, in particular when the motor is not running due to no power supply. This design enables backdraft damper shutting and hot air distribution to other premises through ventilation ducts when the motor is not running.
Learn More -
TA975 Petrol Generator
Excl. Tax: € 121.94 Incl. Tax: € 149.99TAGRED PROFESSIONAL TA975 is compact and portable generator, perfect for home, garden or outdoor activities.With 2 stroke, petrol engine, generator provides a reliable source of electrical backup or standby power for light trade, DIY, leisure and home users alike! Generator delivers 0,68kW of power from a 230V socket. This generator is powered by our reliable and quite running 2 HP petrol engine. Also features a 12 V output for maximum flexibility. A 5 litre fuel tank gives 5,8 hours of run time at 100% load.
Learn More -
E-IBO 15-14 Circulation Pump
Compared to traditional circulation pumps, using the permanent magnet motor allows to reduce the energy consumption of the E-IBO pumps to as low as 3W depending on the system. The pumps are equipped with a spherical impeller operating in various planes.
Learn More -
IBO OHI 25-60/130 BR Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI 15-60/130 BR Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI PRO MAX circulating pump
OHI PRO series are seal-less circulation pumps with increased durability. The pumps have a higher density ceramic shaft and plain bearings. Motor durability and better electrical parameters are achieved by using stronger Class F insulation winding. All processes during the manufacture of OHI PRO pumps are carried out by robots. The robots also check the quality of the intermediate products after each stage of production. At the end, the pumps are electrically and hydraulically tested. Due to the automation of the manufacturing process, the final product is of the top quality that is reproducible in every unit. All these actions have allowed us to extend the warranty period to 3 years. The pumps are supplied with union joints and a cable with a plug.
Learn More -
DRAGON PT BLACK - CHIMNEY COWL
Excl. Tax: € 146.33 Incl. Tax: € 179.99Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.Powder coated chimney cowl. Dispatch time 2-3 weeks.
Learn More -
IBO OHI PRO circulating pump
OHI PRO series are seal-less circulation pumps with increased durability. The pumps have a higher density ceramic shaft and plain bearings. Motor durability and better electrical parameters are achieved by using stronger Class F insulation winding. All processes during the manufacture of OHI PRO pumps are carried out by robots. The robots also check the quality of the intermediate products after each stage of production. At the end, the pumps are electrically and hydraulically tested. Due to the automation of the manufacturing process, the final product is of the top quality that is reproducible in every unit. All these actions have allowed us to extend the warranty period to 3 years. The pumps are supplied with union joints and a cable with a plug.
Learn More -
IBO NOVA circulating pump
The NOVA circulating pump is equipped with a permanent magnet motor and a pressure differences regulator for automatic and continuous pump capacity adjustment to the actual requirements of the system. The pump control panel is located on top of the motor for easier operation by the user. Current power consumption is displayed on its panel.The pump is supplied with union joints and cable adapter.
Learn More -
RCM - Roof Fan
Excl. Tax: € 121.94 Incl. Tax: € 149.99The roof fan HAVACO RCM-series is a universal roof fan which works in exhaust or supply mode in ventilation systems. The fan is equipped with a motor with ball bearing and a cover. This provides protection from adverse weather conditions. -
Rotary Chimney Cowl
Excl. Tax: € 65.03 Incl. Tax: € 79.99The Rotary chimney cowl which uses the wind's force to improve the chimney draught. It arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow.
Learn More -
-
IBO CPI 15-15 Pump
Seal-less circulation pumps designed for forcing hot water circulation. In systems without hot water pumps, after opening the tap, before the hot water starts flowing, cool water remaining in the pipeline will flow first. If a hot water pump is installed, hot water will flow almost immediately after opening the tap. The pump is usually installed upstream the boiler or hot water tank. With years of experience, we have been able to improve previous designs and create the top quality pump. Using the latest technology, the efficiency and, consequently, the energy consumption have been improved compared to older designs. Brass body and ceramic shaft guarantee the pump is almost faultless.
Learn More -
OMIS 40-50/200 circulating pump
Excl. Tax: € 101.62 Incl. Tax: € 124.99The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. OMIS series pumps are designed for pumping drinking water, they can operate in water circuits where the water temperature cannot exceed 120°C and cannot be lower than 5°C. The pumps cannot work in water circuits or in circuits containing water with glycol in which solid impurities may be present (e.g. pieces of rust, limescale). Learn More
-
4" SKM deep well pump
Excl. Tax: € 130.07 Incl. Tax: € 159.99Multi-stage deep well peripheral pump. Depending on the customer requirements, the pump can be equipped with standard 15 or 20 m cable with a plug. Due to the capacitor built into the motor, the pump is ready for installation immediately after unpacking. The pump is supplied with thermal protection mounted in the motor winding.
Learn More -
3" SQIBO/SCR deep well pump
Excl. Tax: € 97.55 Incl. Tax: € 119.9975mm deep well displacement pumps (SQIBO/3”SCR). The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pumps are equipped with power cables of varying lengths terminated with a plug. Due to the capacitor built into the motor, the pump is ready for installation immediately after unpacking. The pump is equipped with thermal protection mounted in the motor winding. SQIBO and SCR pumps are among the most popular screw pumps available on the Polish market. The pumps are recognized by customers for their robust design and attractive price.
Learn More -
IBO OHI 25-40/130 Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
Submersible Pump IP
Excl. Tax: € 52.84 Incl. Tax: € 64.99IP submersible plastic pumps designed for pumping clean and slightly contaminated water. The pumps have an outlet connection to which discharge hoses of different diameters can be connected depending on the user's requirements. Small size and light weight make the pumps exceptionally easy to operate and maintain. The pumps are equipped with float switches for automatic pump control. All pumps are supplied with thermal protection mounted in the motor winding. IP INOX pumps have a similar design to IP pumps but their housing is made of high quality AISI 304 stainless steel.
Learn More -
Vibration Pump
Excl. Tax: € 40.64 Incl. Tax: € 49.99105 mm diameter vibration pumps for irrigation. Due to their high efficiency, NEMO and VM60 submersible vibration pumps are perfect for irrigation with clean water. Despite the small size, the pump design based on solenoids allows creating high pressure required for irrigation. Due to their compact size and low weight, vibration pumps are very popular among allotment gardeners. Pumps are equipped with a 10 m power cable. Pump housing is made of aluminium. Compact-size Nemo and VM60 pumps can operate even in small wells. The minimum diameter of a drilled well in which the pump can be used is 120 mm.
Learn More -
2" STING deep well pump
Excl. Tax: € 130.07 Incl. Tax: € 159.992 "STING is the first and at the moment the only IBO 2” deep well displacement pump. The diameter of the pump does not exceed 53 mm and the hydraulic section consists of the stator, rotor and clutch. The pump is mainly made of stainless steel. The pump is equipped with a 14 m cable terminated with a plug and the capacitor is built into the motor so that pump is ready for installation immediately after unpacking. The pump is equipped with thermal protection mounted in the motor winding.
Learn More -
IPML Circulation Pump
Excl. Tax: € 109.75 Incl. Tax: € 134.99Pumps designed for constant or variable flow water supply systems with the medium temperature not exceeding 100°C (80°C) and the pressure not exceeding 0.6 MPa. Pumps are most often used in heating and cooling systems. The smallest of the series, the IPML 25/125 pump can also be used to fill solar systems. The IPML 50/1100 and 50/2200 water circulation pumps are intended for water containing non-abrasive and non-absorbent solid impurities of 0.27 kg/m3.
Learn More -
Brass pump connection
Excl. Tax: € 16.25 Incl. Tax: € 19.99Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.
Learn More -
Weld Master 330 AMP Welder
Excl. Tax: € 113.81 Incl. Tax: € 139.99Weld Master 330 AMP Welder is Lightweight, compact design makes the device extremely mobile and allows you to work in extremely difficult locations. Variable amperage control of between 30 and 330 amps ensure that you are always in control.Anti-stick and thermal protection are integrated into this fan cooled unit for your piece of mind and to protect the unit from premature damage. Your inverter is supplied with an MMA DIN electrode holder and lead, DIN rail with clamp and wire brush all packed in a plastic rugged carry case giving you safe and convenient storage and transportation.
Learn More -
Non-return valve for fans CATA
Excl. Tax: € 5.68 Incl. Tax: € 6.99When the fan is turned off, the non-return flap prevents outside air from entering the room and out of hot air. When the fan is running, the non-return flap opens to allow unwanted air to be removed efficiently.
Learn More -
FFK filter
Excl. Tax: € 105.68 Incl. Tax: € 129.99FFK – removable G3 metal filter-box for transported air purification. The filter is connected to the fan casing by lock-latches to provide easy removal of the filter for cleaning.
Learn More -
Sewage Pump FURIATKA
Excl. Tax: € 146.33 Incl. Tax: € 179.99Submersible cast iron pumps with cutting system. The pumps are designed for pumping domestic sewage and draining flooded rooms. In order to minimize the risk of clogging, the pumps are equipped with an exceptionally effective "screw" cutting system. To ensure reliable operation, the pumps have overload protection mounted on the cable. To prevent motor overloading, the protection will stop the pump. The cast iron construction makes the pumps resistant to mechanical damage and chemical corrosion. The pumps are equipped with a float switch for automatic operation control, and the pump outlet provides connection of the discharge hose with a hose clamp or fast-connection. Their robust design and exceptionally effective cutting system have made the Furiatka series one of the most popular pumps with cutting system on the market.
Learn More -
TT PRO Round Duct Fan
Excl. Tax: € 101.62 Incl. Tax: € 124.99The VENTS TT and VENTS TT PRO fans are featured with wide capabilities and high performance of axial and centrifugal fans and are specifically designed for supply and exhaust ventilation of premises requiring high pressure, powerful air flow and low noise level. The fans are compatible with round air ducts from Ø 100 to 315 mm. Exhaust ventilation systems based on the VENTS TT fans are the best solution for ventilation of bathrooms and kitchens and other humid premises as well for ventilation of flats, cottages, shops, cafes, etc.
Learn More -
TT Round Duct Fan
Excl. Tax: € 77.23 Incl. Tax: € 94.99The VENTS TT and VENTS TT PRO fans are featured with wide capabilities and high performance of axial and centrifugal fans and are specifically designed for supply and exhaust ventilation of premises requiring high pressure, powerful air flow and low noise level. The fans are compatible with round air ducts from Ø 100 to 315 mm. Exhaust ventilation systems based on the VENTS TT fans are the best solution for ventilation of bathrooms and kitchens and other humid premises as well for ventilation of flats, cottages, shops, cafes, etc.
Learn More -
Pump Connection
Excl. Tax: € 6.50 Incl. Tax: € 7.99Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.
Learn More -
Rubber firehose
Excl. Tax: € 16.25 Incl. Tax: € 19.99The water hose is designed for forcing and pumping clean, dirty water and septic tanks. It will work with both electric and combustion pumps.
Learn More
The hose is characterized by high thermal and mechanical resistance. It is coated with a soft rubber mass.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
Sludge Pump KD758
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
BLACK 2mm CHIMNEY COWL
Excl. Tax: € 121.94 Incl. Tax: € 149.99Chimney cowl with external bearing made of carbon steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
KD1833 300 AMP Welder
Excl. Tax: € 81.29 Incl. Tax: € 99.99KRAFT&DELE KD1833 is Lightweight, compact design makes the device extremely mobile and allows you to work in extremely difficult locations. Variable amperage control of between 20 and 300 amps ensure that you are always in control.Anti-stick and thermal protection are integrated into this fan cooled unit for your piece of mind and to protect the unit from premature damage. Your inverter is supplied with an MMA DIN electrode holder and lead, DIN rail with clamp and wire brush all packed in a plastic rugged carry case giving you safe and convenient storage and transportation.
Learn More -
Cesspool Pump KD760
Excl. Tax: € 105.68 Incl. Tax: € 129.99Submersible sewage and dirty water pump with grinder used mainly for emptying of cesspits, septic tanks or flooded rooms.This high efficient pump easily shreds e.g textiles such as cloths, diapers, tights, etc.
Learn More -
Cesspool Pump KD764
Excl. Tax: € 139.99 Incl. Tax: € 139.99Submersible sewage and dirty water pump with 3-stage grinder used mainly for emptying of cesspits, septic tanks or flooded rooms.This high efficient pump easily shreds e.g textiles such as gloves, cloths, diapers, tights, bags etc.
Learn More -
Sludge Pump KD753
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
WP30 Water Pump
Excl. Tax: € 178.85 Incl. Tax: € 219.99WP30 Water Pump is a portable and proffessional clean/dirty water pump, used by fire brigades, construction and plumbing companies or agricultural farms. It can be used for dewatering flooded buildings and rooms, emptying swimming pools or taking water from lakes,rivers, ponds or wells to irrigation of fields and meadows.
Learn More -
KD5060 Water Pump
Excl. Tax: € 101.62 Incl. Tax: € 124.99KD5060 is a compact and portable clean/dirty water pump, perfect for home, garden or outdoor activities. It can be used for dewatering flooded buildings and rooms, emptying swimming pools or taking water from lakes,rivers, ponds or wells to irrigation of fields and meadows..
Learn More -
KD1855 300 AMP Welder
Excl. Tax: € 97.55 Incl. Tax: € 119.99KRAFT&DELE KD1855 is Lightweight, compact design makes the device extremely mobile and allows you to work in extremely difficult locations. Variable amperage control of between 20 and 300 amps ensure that you are always in control.Anti-stick and thermal protection are integrated into this fan cooled unit for your piece of mind and to protect the unit from premature damage. Your inverter is supplied with an MMA DIN electrode holder and lead, DIN rail with clamp and wire brush all packed in a plastic rugged carry case giving you safe and convenient storage and transportation.
Learn More -
BATHROOM FAN CATA E-100 BLACK
Excl. Tax: € 65.03 Incl. Tax: € 79.99Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With perimeter aspiration, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years.For any interior: practice, office, living room and especially the bathroom and toilet. Learn More -
BATHROOM FAN CATA E-100 GTH
Excl. Tax: € 139.99 Incl. Tax: € 139.99Extremely quiet axial fan for any interior, especially to the bathroom and toilet but also office and living room. Low power consumption. Quiet operation. Characteristic modern design and high quality.
Hygro (humidistat). With lighted LED-Display. Adjustable humidity detector from 40% to 95%, and adjustable electronic Timer 0-15 minutes.
The Model E - GLASS DISPLAY allows continuous ventilation (24 hours) from rooms with high humidity by activating the switch S1. If the humidity exceeds the adjusted humidity level, the Hygro function is activated and the fan operates at the highest level. Decreases the degree of humidity again below the set value, the unit turns in the case of S1 = OFF from, or at S1 = ON to the low level back. The room fan will be switched to the high level when the light switch of the space is switched on. After turning off the light switch, the device is still on during the timer set time at a maximum level and eventually shuts down in the case of S1 = OFF, or at S1 = ON to the low level back
Learn More -
Pressure switch PC-2
Excl. Tax: € 24.38 Incl. Tax: € 29.99The pressure switches are intended for automatic switch on and off of hydrophore sets together surface and deep well pumps equipped with an electric motor. The switches control the device operation, depending on the setting of on and off pressure parameters. The switches have a casing made of plastic, and the contacts are made of copper or silver. Learn More -
Pressure switch PC/SK2
Excl. Tax: € 8.12 Incl. Tax: € 9.99The pressure switches are intended for automatic switch on and off of hydrophore sets together surface and deep well pumps equipped with an electric motor. The switches control the device operation, depending on the setting of on and off pressure parameters. The switches have a casing made of plastic, and the contacts are made of copper or silver. Learn More -
Five-Way Connection
Excl. Tax: € 8.12 Incl. Tax: € 9.99Brass port for installation of hydrophore accessories.Diameter of connecting threads: 1” – pump connector, 1” pumping system connector, 1”- connector of anti-vibration hose and tank, %" - manometer connector, %" - pressure switch connector. Outlet available in two sizes: 70 mm and 90mm high.
Learn More -
Pressure gauge
Excl. Tax: € 8.12 Incl. Tax: € 9.99The manometer is used to measure pressure in the installation. The operating range is from 0 to 10 bar, GZ connector port in ¼” size. Learn More -
AJ 50/60 Surface Pump
Excl. Tax: € 85.36 Incl. Tax: € 104.99Single-stage self-priming centrifugal surface pump equipped with the Venturi tube system for increased suction capacity, designed for pumping of clean cold water from own intakes and for increasing pressure. Sections of pump body and shaft that come in contact with water are made of stainless steel (INOX design). The pump has a power cable with a plug. The pump motor is provided with thermal protection.
Learn More -
PC-10P Pump Controller
Excl. Tax: € 48.77 Incl. Tax: € 59.99Automaton controlling operation of surface and deep well pumps. It replaces the pressure switch and hydrophore tank. Opening the tap sends a signal to PC-10P automaton which starts the pump. Closing the tap makes PC-10P stop the pump. This automaton, as opposed to other types, can match with one-phase pumps with power up to 2200 W, the power consumption of which does not exceed 16A during operation. The device provided with protection against dry run. When the well runs out of water, the devices stops the pump. PC-10P is equipped with 1" diameter ports. Learn More -
PC-15 Pump Controller
Excl. Tax: € 28.45 Incl. Tax: € 34.99Automaton controlling operation of surface and deep well pumps with power up to 1100 W. It replaces the pressure switch and hydrophore tank. Opening the tap sends a signal to PC-15 automaton which starts the pump. Closing the tap makes PC-15 stop the pump. The automaton can match with one-phase pumps the power consumption of which does not exceed 12A during operation. The device provided with protection against dry run. When the well runs out of water, the devices stops the pump. The device equipped with a 60 cm long cable intended for connection to the pump and 1m long power cable. PC-15 is equipped with 1" diameter ports.
Learn More -
CPM INOX Pump
Excl. Tax: € 154.46 Incl. Tax: € 189.99Single-step centrifugal pumps with normal suction for pumping non-aggressive liquids with content of solid pollutants with nonabrasive and non-absorptive nature of 0,27 kg/m³. Maximum temperature of pumped liquid is 60 °C. The pump motor is equipped with thermal protection built-in in the winding.
Learn More -
Self-adjusting EB chimney cowl 0,6mm
Excl. Tax: € 93.49 Incl. Tax: € 114.99Chimney cowl made of acid-resistant steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys.The use of a high-quality ball bearing above the body guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl.Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
Square base for chimney cowl 0,6mm
Excl. Tax: € 24.38 Incl. Tax: € 29.99Square base made of acid-resistant steel is designed to protect the space around the chimney from adverse weather conditions, further simplifies the installation of the chimney cowl.
Learn More -
Self-adjusting chimney cowl 0,6mm
Excl. Tax: € 52.84 Incl. Tax: € 64.99Chimney cowl made of acid-resistant steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys.Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
CARBON 2mm CHIMNEY COWL
Excl. Tax: € 138.20 Incl. Tax: € 169.99Chimney cowl with external bearing made of carbon steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
FASTfix firehose
Excl. Tax: € 28.45 Incl. Tax: € 34.99Elastic discahrge hoses intended for water and sewerage pumping.Fluid seal technology allow to seal rubber inside of the hose with polyester outside.Resistant to high temperature, pressure and hard to damage.
Learn More
Hoses available in versions:
• In sackcloth braiding (firefighting hose) with quick-fit connectors, with maximum admissible pressure of 8 bar.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
Switch P2-10
Excl. Tax: € 32.51 Incl. Tax: € 39.99 -
ANDRIS 6 LUX
Excl. Tax: € 138.20 Incl. Tax: € 169.99The Andris Lux from Ariston is a market leading small unvented electric water heater.The Andris Lux encompasses Italian design, energy efficiency, durability, usability and safety, and is available as oversink and undersink versions.The Andris Lux is the perfect solution to give users small amounts of hot water in locations such as loft conversions, garages, workshops, kitchens etc.
Learn More -
Sludge Pump TA502
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
Sludge Pump 50 KBFU
Excl. Tax: € 199.18 Incl. Tax: € 244.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
KD1854 300 AMP Welder
Excl. Tax: € 105.68 Incl. Tax: € 129.99KRAFT&DELE KD1854 is Lightweight, compact design makes the device extremely mobile and allows you to work in extremely difficult locations. Variable amperage control of between 20 and 300 amps ensure that you are always in control.Anti-stick and thermal protection are integrated into this fan cooled unit for your piece of mind and to protect the unit from premature damage. Your inverter is supplied with an MMA DIN electrode holder and lead, DIN rail with clamp and wire brush all packed in a plastic rugged carry case giving you safe and convenient storage and transportation.
Learn More -
Ariston LYDOS R Boiler
Excl. Tax: € 249.99 Incl. Tax: € 249.99Ariston LYDOS R is the best solution for the user who wants a product able to guarantee the maximum saving and at the same time maximum perfomance and maximum safety. The WasserPlus technology provides up to 16% more hot water. Simple installation, safe and environmentally friendly construction.
Learn More -
Ariston LYDOS ECO Water Heater
Excl. Tax: € 279.99 Incl. Tax: € 279.99Ariston LYDOS ECO is the best solution for the user who wants a product able to guarantee the maximum saving and at the same time maximum perfomance and maximum safety. The WasserPlus technology provides up to 16% more hot water. Simple installation, safe and environmentally friendly construction.
Learn More -
Sewage Pump CTR
Excl. Tax: € 138.20 Incl. Tax: € 169.99CTR cast iron pump equipped with a grinding system with a cutting knife due to which solid elements included in pumped medium are disintegrated. A float switch is mounted in the pump, allowing for automatic device opreation. In order to improve fault-free operation, the pump is equipped with overload protection mounted on the cable. The cast iron structure make the pump resistant to mechanical damage and chemical corrosion.
Learn More -
Sewage Pump Magnum
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible pumps designed for pumping sewage and water from flooded premises. The pump is available with a float switch for automatic operation control or without the float switch. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. Magnum pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of aluminium and the impeller is made of cast iron. Magnum 2500 and 2900 pumps are available with and without the float switch.
Learn More -
Sewage Pump M79900
Excl. Tax: € 113.81 Incl. Tax: € 139.99ORCA is submersible sewage and dirty water pump with grinder used mainly for emptying of cesspits, septic tanks or flooded rooms.
Learn More -
Submersible Pump TA511
Excl. Tax: € 56.90 Incl. Tax: € 69.99Submersible sewage and dirty water pump used mainly for emptying of flooded rooms and swimming pools, lakes, ponds or wells.
Learn More -
Vintage Hand Water Pump
Excl. Tax: € 113.81 Incl. Tax: € 139.99The functional and decorative Omnigena hand water pump has been manufactured from durable cast iron and designed in vintage style. It is well-suited for the well water, river water and all kinds of non-corrosive water. This water pump is totally hand operated, and very easy to perform. With the handle moving up and down, water is pumped from the ground and will flow out from the water tap. This hand pump can be easily installed and mounted. The cast iron pump is a true eye-catcher for any yard or garden.
Learn More -
KD109B Petrol Generator
Excl. Tax: € 121.94 Incl. Tax: € 149.99Kraft&Dele KD109 is a powerful, compact and portable generator, perfect for home, garden or outdoor activities.With 2 stroke, air cooled petrol engine, generator provides a reliable source of electrical backup or standby power for light trade, DIY, leisure and home users alike! Generator delivers 0,8kW of power from a 230V socket. This generator is powered by our reliable and quite running 2.0HP petrol engine. Also features a 12 V output for maximum flexibility. A 4 litre fuel tank gives 8-10 hours of run time at 100% load.The power generators engine has chromed piston so it works very stable, silent and economical.The rubber stands suppress all vibrations and minimise noise.The engine generator is built into a heavy duty powder coated all-steel frame to protect the generators components and provide useful lifting and securing points.
Learn More -
TT Silent M Duct Inline Fan
Excl. Tax: € 158.53 Incl. Tax: € 194.99The VENTS TT Silent-M fans are recommended as a component of the air handling systems for various commercial and industrial premises with high requirements to noise level, i.e. in libraries, conference halls, educational institutions, kindergartens, etc. Learn More -
Mating Flange FKV
Excl. Tax: € 16.25 Incl. Tax: € 19.99Mating Flange FKV is designed to connected roof fan to a ventilation shaft which is fixed directly to the fan base.Made of galvanized steel.
Learn More -
PRT Base Reduction
Excl. Tax: € 36.58 Incl. Tax: € 44.99If diameter of chimney is not 150/200/250/300 mm it can be connect with chimney cowl by force-in mounting chimney base which allows to connect Turbowent and Rotowent type cowls to a certain pipe chimney ending by pushing the base into the round duct.Base is made for order and delivery time is up to 14 days.
Learn More -
DRAGON PTU - CHIMNEY COWL
Excl. Tax: € 113.81 Incl. Tax: € 139.99Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
IBO OHI 50-140/220 Pump
Excl. Tax: € 195.11 Incl. Tax: € 239.99Glandless OHI pumps designed for larger facilities. Single gear and single phase motor. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Suitable for almost all heating and air-conditioning systems.
Learn More -
IBO OHI 50-170/250 Pump
Excl. Tax: € 227.63 Incl. Tax: € 279.99Glandless OHI pumps designed for larger facilities. Single gear and single phase motor. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Suitable for almost all heating and air-conditioning systems.
Learn More -
IBO OHI 40-80/200 circulating pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI 32-80/180 circulating pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI 32-60/180 Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI 25-80/180 Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI 15-60/130 Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI 25-60/130 Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI 25-40/180 Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
IBO OHI 25-60/180 Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More -
RS-1-300 Speed Controller
Excl. Tax: € 32.51 Incl. Tax: € 39.99Motor speed controller RS-1-400 (under surface mounted) is used to control rotating speed of single - phase motors. It can be used in situation where the motor speed is governed by adjusting the effective voltage given to the winding.
Learn More -
RS-1-400 Speed Controller
Excl. Tax: € 40.64 Incl. Tax: € 49.99Motor speed controller RS-1-400 is used to control rotating speed of single - phase motors. It can be used in situation where the motor speed is governed by adjusting the effective voltage given to the winding.
Learn More -
VVR - Window Fan
Excl. Tax: € 73.16 Incl. Tax: € 89.99Axial window fan with automatic louver shutters for exhaust ventilation with the capacity up to 455 m3/h. Flange mounting sizes 180 mm and 230 mm. Learn More -
Chimney pot ALFAWENT Plus
Excl. Tax: € 169.99 Incl. Tax: € 169.99Chimney pot with electric fan ALFAWENT Plus - chimney pot with electric fan designed for forced air exhaustion from blocks of flats and public utility buildings. Thanks to its dimensions it can be fixed on mounting adapter or chimney cap both in one- and multi-row air-ducts in the process of natural ventilation. The advantage of the pot is its silent-running and efficient electric motor produced by company of high reputation - EBM. Efficiency: 305 m3/h, with the option of variable adjustment with the usage of speed controller.
Learn More -
DRAGON BK - CHIMNEY COWL
Excl. Tax: € 117.88 Incl. Tax: € 144.99Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
BATHROOM FAN CATA E-100 GSTH
Excl. Tax: € 113.81 Incl. Tax: € 139.99Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With LED - display, Hygrosteuerung, tracking function, Randabsaugung, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years. For any interior: Practice, office, living room and especially the bathroom and toilet.
Hygro (humidistat). With lighted LED-Display. Adjustable humidity detector from 40% to 95%, and adjustable electronic Timer 0-15 minutes.
The Model E - GLASS DISPLAY allows continuous ventilation (24 hours) from rooms with high humidity by activating the switch S1. If the humidity exceeds the adjusted humidity level, the Hygro function is activated and the fan operates at the highest level. Decreases the degree of humidity again below the set value, the unit turns in the case of S1 = OFF from, or at S1 = ON to the low level back. The room fan will be switched to the high level when the light switch of the space is switched on. After turning off the light switch, the device is still on during the timer set time at a maximum level and eventually shuts down in the case of S1 = OFF, or at S1 = ON to the low level back
Learn More -
BATHROOM FAN CATA E-100 Silver
Excl. Tax: € 65.03 Incl. Tax: € 79.99Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With perimeter aspiration, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years.For any interior: practice, office, living room and especially the bathroom and toilet. Learn More -
LD Bathroom Fan
Excl. Tax: € 20.32 Incl. Tax: € 24.99Modern design and aesthetic look, reliable and low-watt electric motor. Designed for continuous operation, requires no maintance. Equipped with overheating protection. Casing and impeller are made of high-quality durable ABS plastic. UV resistant. Various decorative plates interchangeable for the front panel. Protection rating IP 34 The LD series is a range of decorative extract fans for the domestic environment, like bathroom, toilet, kitchen etc... The range is designed to provide extraction levels that comply with Building Regulations requirements. Surface mounting directly into standard ducting, through the wall or ceiling installation. Learn More -
LDA Bathroom Fan
Excl. Tax: € 28.45 Incl. Tax: € 34.99Modern design and aesthetic look, reliable and low-watt electric motor. Designed for continuous operation, requires no maintance. Equipped with overheating protection. Casing and impeller are made of high-quality durable ABS plastic. UV resistant. Various decorative plates for the front panel of the natural aluminum. Protection rating IP 34 The LD series is a range of decorative extract fans for the domestic environment, like bathroom, toilet, kitchen etc... The range is designed to provide extraction levels that comply with Building Regulations requirements. Surface mounting directly into standard ducting, through the wall or ceiling installation. Learn More -
VKM - Inline fan
Excl. Tax: € 117.88 Incl. Tax: € 144.99In-line centrifugal fan in steel casing with air capacity up to 1880 M3/H. The impeller with backward blades is powered by the single phase motor with external rotor and overheating protection with automatic restart. The motor is equipped with ball bearings for long service life, designed for at least 40.000 hours. Motor protection rating IP44. Learn More -
OV1 - Wall Fan
Excl. Tax: € 69.10 Incl. Tax: € 84.99The VENTS OV1-series is low pressure axial fan in steel casing for wall mounting on a square mounting plate.OV1 offering excellent value for money with the following features:- Impeller made of aluminium - Wall mounting frame- Particularly suitable for external mounting- Energy saving, ball bearing mounted motor- Overheating protection with automatic restart- Speed controller compatible
Learn More -
VKOMz - Duct Fan
Excl. Tax: € 56.90 Incl. Tax: € 69.99The axial fan from the VENTS VKOM-series is a universal inline fan offering excellent value for money, with the following features: - Impeller made of aluminium - Connection box with cable - Energy saving, ball bearing mounted motor - Overheating protection with automatic restar - Speed controller compatible - Includes mounting fixtures (see technical drawing)
Learn More -
CHIMNEY FAN - KAM
Excl. Tax: € 174.79 Incl. Tax: € 214.99Chimney fans for hot air distribution allow creating fully-featured air heating system based on a fireplace. Such system is the perfect solution for heating of seasonal houses that serve as a second residence during winter time and provides fast and efficient hot air distribution from chimney to other premises. Used for air distribution with the air tempreature range 0°С to +150°С.
Learn More -
VKMK - Roof Fan
Excl. Tax: € 162.59 Incl. Tax: € 199.99The centrifugal roof fan VENTS VKMK-series is a universal roof fan used to increase the draught in ventilation systems. The fan is equipped with a motor with ball bearing and a cover. This provides protection from adverse weather conditions. Learn More -
CHIMNEY FAN - BANAN II
Excl. Tax: € 292.67 Incl. Tax: € 359.99BANAN Hot Air Distribution Set is designed to distribute warm air from the drip above the fireplace hearth to the living areas. It is a combination of a AN Hot Air Ventilator and a bypass. When the air temperature reaches the set value, the set automatically turns on. It will turn off if the temperature of the air flowing from the fireplace falls below the set temperature. BANAN Hot Air Distribution Set significantly increases the efficiency of the fireplace heating system and protects the operation of the system from overheating. BANAN-II Hot Air Distribution Set is a combination of the AN – II Hot Air Ventilator with the BAN bypass.
Learn More -
BAN - Thermostatic bypas
Excl. Tax: € 105.68 Incl. Tax: € 129.99BAN thermostatic bypass with special damper and metal filter is used to prepare air coming into the hot air ventilator. It protects the hot air ventilator from overheating (when motor is not working, for example due to a lack of electricity) by shutting the valve and ejecting air through a damper to another room. Bypass also stabilizes temperature in the system, by opening a damper and sucking cool air, when the air coming into the ventilator is too hot. Bypass is also equipped with a metal filter.
Learn More -
CHIMNEY FAN - AN
Excl. Tax: € 195.11 Incl. Tax: € 239.99AN hot air ventilator is designed to distribute hot air from fireplace hood to rooms in the building. It has a thermically and acoustically insulated ventilator and a thermostat. When temperature on the probe reaches the value set, the ventilator turns on automatically. It turns off when temperature falls down under a value set.
Learn More -
Chimney Cap DA
The chimney cap made of galvanized or acid-resistant steel is designed to protect the chimney flue, improve thrust and prevent flue gas back into the chimney.The chimney cap finish chimney flue and protects it from rain, snow or bird's nesting. It is equipped with special clamp that allows it to be mounted on ventilation or flue pipes in easy way.Max. withstand temperatures up to 180°C.
Learn More -
Chimney Cap DAPT
Excl. Tax: € 36.58 Incl. Tax: € 44.99The chimney cap extension made of galvanized or acid-resistant steel is designed to protect the chimney flue, improve thrust and prevent flue gas back into the chimney.The chimney cap finish chimney flue and protects it from rain, snow or bird's nesting. To simplify the cleaning it is possible to open the chimney extension. Max. withstand temperatures up to 180°C.
Learn More -
WDAC Chimney extension
Excl. Tax: € 36.58 Incl. Tax: € 44.99The chimney cap extension made of galvanized or acid-resistant steel is designed to protect the chimney flue, improve thrust and prevent flue gas back into the chimney.The chimney cap finish chimney flue and protects it from rain, snow or bird's nesting.
Learn More -
TURBOWENT B - Chimney Cowl
Excl. Tax: € 203.24 Incl. Tax: € 249.99The Rotary chimney cowl witch external bearings uses the wind's force to improve the chimney draught. It arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow.Maximum withstand temperature: 250°C.
Learn More -
DRAGON B - CHIMNEY COWL
Excl. Tax: € 105.68 Incl. Tax: € 129.99Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
DRAGON BS - CHIMNEY COWL
Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
DRAGON PT - CHIMNEY COWL
Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
TULIPAN T - Chimney Cowl
The Turbowent Tulipan is a chimney cowl which uses the wind's force to improve the chimney draught. The Tulipan arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow. The construction of this chimney cowl allows to mount it on ducts which are very close to each other.
Learn More -
TULIPAN TBS - Chimney Cowl
Excl. Tax: € 81.29 Incl. Tax: € 99.99The Turbowent Tulipan is a chimney cowl which uses the wind's force to improve the chimney draught. The Tulipan arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow. The construction of this chimney cowl allows to mount it on ducts which are very close to each other.
Learn More -
TURBOWENT PTU - Chimney Cowl
Excl. Tax: € 178.85 Incl. Tax: € 219.99The Rotary chimney cowl witch external bearings uses the wind's force to improve the chimney draught. It arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow.Maximum withstand temperature: 250°C.
Learn More -
TURBOWENT - Chimney Cowl
Excl. Tax: € 203.24 Incl. Tax: € 249.99The Rotary chimney cowl witch external bearings uses the wind's force to improve the chimney draught. It arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow.Maximum withstand temperature: 250°C.
Learn More -
TURBOWENT - Chimney Cowl
Excl. Tax: € 85.36 Incl. Tax: € 104.99Rotary chimney cowl Turbowent is a device, which, in a dynamic way, uses force of the wind to increase chimney draught. The turbine always rotates in the same direction no matter of the wind strength or its direction. It is to be mounted on gravitation based ventilation chimney duct endings, esspecialy on individual and multi storey housing and.Maximum withstand temperature: 150°C
Learn More -
DRAGON - CHIMNEY COWL 0,6mm
Excl. Tax: € 105.68 Incl. Tax: € 129.99Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
TULIPAN - Chimney Cowl
The Turbowent Tulipan is a chimney cowl which uses the wind's force to improve the chimney draught. The Tulipan arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow. The construction of this chimney cowl allows to mount it on ducts which are very close to each other.
Learn More -
TULIPAN TB
The Turbowent Tulipan is a chimney cowl which uses the wind's force to improve the chimney draught. The Tulipan arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow. The construction of this chimney cowl allows to mount it on ducts which are very close to each other.
Learn More -
OV - Wall Fan
Regular Price: € 169.99
Special Price Excl. Tax: € 113.81 Incl. Tax: € 139.99
The axial fan from the VENTS OV-series is a universal industrial fan offering excellent value for money with the following features: - Wall mounting frame; - Particularly suitable for external mounting ; - Energy saving, ball bearing mounted motor ; - Overheating protection with automatic restart ; - Speed controller compatible
Learn More