Search results for 'Flue pipe'
-
PRT Base Reduction
Excl. Tax: € 36.58 Incl. Tax: € 44.99If diameter of chimney is not 150/200/250/300 mm it can be connect with chimney cowl by force-in mounting chimney base which allows to connect Turbowent and Rotowent type cowls to a certain pipe chimney ending by pushing the base into the round duct.Base is made for order and delivery time is up to 14 days.
Learn More -
Grundfos Scala1 5-55 Pump
Excl. Tax: € 599.99 Incl. Tax: € 599.99The Grundfos SCALA1 is a self-priming, multistage pump, that incorporates all the components of a pressure booster into a compact composite enclosure. As it is self-priming, the SCALA1 can pump water from a level below the pump. Provided it is filled with water, the pump can lift water from a depth of 8 m in less than 5 minutes. This facilitates easy installation and start-up of the pump and provides more reliable water supply in installations where there is a risk of dry running and leakages in suction hose or pipes.
Learn More -
Guide rail system
Excl. Tax: € 97.55 Incl. Tax: € 119.99The coupling set is intended for easy and quick removal of the ZWQ, MWQ, Kraken 1800DF pump from the sewage sump (e.g. for periodic inspection or failure). The pump is lowered on a chain along pipe guides to the coupling body, which enables connection and disconnection of the pump with the discharge pipeline. The pump is not connected to the coupling body by a permanent connection and does not require any disassembly. The pump must be equipped with a horizontal connection ending with an orifice.
Learn More -
BLACK SLIDE 0,6mm CHIMNEY COWL
Excl. Tax: € 97.55 Incl. Tax: € 119.99Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
BLACK B 0,6mm CHIMNEY COWL
Excl. Tax: € 146.33 Incl. Tax: € 179.99Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
BLACK 0,6mm CHIMNEY COWL
Excl. Tax: € 130.07 Incl. Tax: € 159.99Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
Non-Return Valve
Excl. Tax: € 8.12 Incl. Tax: € 9.99The check valve is used to ensure fluid flow in one direction only. Example application: The non-return valve installed at the end of the suction pipe together with the suction basket and inserted into the well, after switching off the pump, prevents the water remaining in the pipe from flowing down, and thus protects the pump against dry running at the next start-up. Installed directly above the hydrophore pump, it protects against the impact of the backflowing liquid.
Learn More -
MAGI H circulation pump
The MAGI circulating pump is equipped with a permanent magnet motor and a pressure differences regulator for automatic and continuous pump capacity adjustment to the actual requirements of the system. The pump control panel is located on top of the motor for easier operation by the user. Current power consumption is displayed on its panel.The pump is supplied with union joints and cable adapter
Learn More -
BETA 2 circulating pump
The BETA 2 pumps are designed for forcing circulation in central heating systems and solar systems. The pumps are equipped with an electronic processor for automatic pump control, which together with a frequency converter allows for significant energy savings. The processor provides 11 operating modes depending on the system requirements. The power consumption is from 1/10 to 1/3 of conventional pumps.The pump is supplied with union joints and power cable.
Learn More -
IBO OHI 25-60/130 BR Pump
The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).
Learn More