Search results for 'DRAGON DR BS'

Submersible pumps designed for pumping sewage, dirty water, and water from flooded premises. The pumps are equipped with float switches for automatic pump control. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. WQF pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of AISI304 stainless steel, and the impeller is made of grey cast iron.

The coupling set is intended for easy and quick removal of the ZWQ, MWQ, Kraken 1800DF pump from the sewage sump (e.g. for periodic inspection or failure). The pump is lowered on a chain along pipe guides to the coupling body, which enables connection and disconnection of the pump with the discharge pipeline. The pump is not connected to the coupling body by a permanent connection and does not require any disassembly. The pump must be equipped with a horizontal connection ending with an orifice.

A series of professional submersible pumps with mixing system, designed for customers who need a strong and reliable product in their professional work. These pumps are widely used in sewage pumping stations. MWQ pumps are designed for pumping raw sewage from pumping stations where dense sludge may be deposited. The pumps have a special additional external rotor (agitator) for mixing and splitting heavy sludge. Materials used guarantee long-term and faultless operation. Motor shaft is made of stainless steel. Motor chamber is sealed with a double SiC/ SiC mechanical seal. The pump uses a multi-channel impeller for pumping large diameter impurities. All MWQ pumps are suitable for installation with a guide rail system. The motors have Class F winding insulation and single-phase versions are additionally equipped with thermal protection mounted in the winding. The pumps have bearings manufactured by NSK in Japan. Flanges for connecting pipes or fast-connection. The pumps are available as single-phase 230V ~/ 50Hz versions with a float switch, and 3-phase 400V ~ 3 / 50Hz version. The pumps can be supplied with guide rail systems for installation in pump stations. The guide rail system is sold separately.

Pumps designed for constant or variable flow water supply systems with the medium temperature not exceeding 100°C (80°C) and the pressure not exceeding 0.6 MPa. Pumps are most often used in heating and cooling systems. The smallest of the series, the IPML 25/125 pump can also be used to fill solar systems. The IPML 50/1100 and 50/2200 water circulation pumps are intended for water containing non-abrasive and non-absorbent solid impurities of 0.27 kg/m3.

The SPA pump is designed for circulation or filtration of swimming pools, spas, whirlpool bathtubs and hot tub spas. The JA pump can also be used in pools containing sea water, e.g. fish farms. The pump motor is equipped with thermal protection and provides exceptionally low-noise operation and low vibrations. The JA50 pumps are widely used by SPA manufacturers.

Submersible pumps with cutting system designed for pumping domestic sewage. In case of flooding, they can be used for draining rooms. Their robust design and quality materials used (stainless steel, cast iron), the cutting system with a cutting knife, and very reasonable price have made the pumps very popular among individual customers. The pumps are equipped with a float switch for automatic operation. To ensure reliable operation, the pumps have overload protection mounted on the cable. V 550, V1500 and V2200 pumps incorporate the high efficiency “screw” cutting system. Pump outlet provides connection of the discharge hose with a hose clamp or fast-connection.

The check valve is used to ensure fluid flow in one direction only. Example application: The non-return valve installed at the end of the suction pipe together with the suction basket and inserted into the well, after switching off the pump, prevents the water remaining in the pipe from flowing down, and thus protects the pump against dry running at the next start-up. Installed directly above the hydrophore pump, it protects against the impact of the backflowing liquid.

Brass regulators designed to regulate input pressure in water and air systems. They also protect the systems against pressure spikes. Compact size and low-noise operation. Pressure regulators are available in sets with pressure gauges.

The MAGI circulating pump is equipped with a permanent magnet motor and a pressure differences regulator for automatic and continuous pump capacity adjustment to the actual requirements of the system. The pump control panel is located on top of the motor for easier operation by the user. Current power consumption is displayed on its panel.The pump is supplied with union joints and cable adapter