Search results for 'an'

Professional submersible pump compliant with the most demanding European standards, intended for customers using drainage pumps in their professional work. Due to the use of a closed impeller, the pump can pump clean and slightly contaminated water. With its 1500 W motor, 3-inch outlet, and maximum flow of up to 1400l/min, as well as a relatively low weight, the pump can be used to drain flooded houses, premises and garages during minor and major flooding. The pump is equipped with a float switch for operation control and thermal protection mounted in the motor winding.

The pumps are designed to force circulation in systems equipped with an electronic processor, which automatically controls the operation of the pumps. This feature, in combination with a frequency converter, allows for significant savings in electricity consumption. This solution is used in central heating and solar installations. The equipped processor enables the pump to choose one of 8 modes of operation as needed per installation. The power consumption is from 1/10 to 1/3 lower than in classic pumps. The pump set includes a set of screw connections and a power cord.

The coupling set is intended for easy and quick removal of the ZWQ, MWQ, Kraken 1800DF pump from the sewage sump (e.g. for periodic inspection or failure). The pump is lowered on a chain along pipe guides to the coupling body, which enables connection and disconnection of the pump with the discharge pipeline. The pump is not connected to the coupling body by a permanent connection and does not require any disassembly. The pump must be equipped with a horizontal connection ending with an orifice.

A series of professional submersible pumps with mixing system, designed for customers who need a strong and reliable product in their professional work. These pumps are widely used in sewage pumping stations. MWQ pumps are designed for pumping raw sewage from pumping stations where dense sludge may be deposited. The pumps have a special additional external rotor (agitator) for mixing and splitting heavy sludge. Materials used guarantee long-term and faultless operation. Motor shaft is made of stainless steel. Motor chamber is sealed with a double SiC/ SiC mechanical seal. The pump uses a multi-channel impeller for pumping large diameter impurities. All MWQ pumps are suitable for installation with a guide rail system. The motors have Class F winding insulation and single-phase versions are additionally equipped with thermal protection mounted in the winding. The pumps have bearings manufactured by NSK in Japan. Flanges for connecting pipes or fast-connection. The pumps are available as single-phase 230V ~/ 50Hz versions with a float switch, and 3-phase 400V ~ 3 / 50Hz version. The pumps can be supplied with guide rail systems for installation in pump stations. The guide rail system is sold separately.

Pumps designed for constant or variable flow water supply systems with the medium temperature not exceeding 100°C (80°C) and the pressure not exceeding 0.6 MPa. Pumps are most often used in heating and cooling systems. The smallest of the series, the IPML 25/125 pump can also be used to fill solar systems. The IPML 50/1100 and 50/2200 water circulation pumps are intended for water containing non-abrasive and non-absorbent solid impurities of 0.27 kg/m3.

Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.

Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.

Single-stage self-priming peripheral surface pumps for pumping of clean cold water from own intakes and for increasing pressure. Pump impellers are made of brass. The pump body is made of durable cast iron with the built-in non-return valve. The pump motor is provided with thermal protection. The pumps have a power cable with a plug.

WZI-AUTO 900 is a compact device designed to provide households with clean water from their own water intakes (wells) or to increase pressure from the water supply network. The pumps are equipped with a frequency inverter that guarantees constant pressure in all water taps, soft starts of the motor and lower current consumption compared to classical pressure boosting plants. The pumps with an integrated frequency inverter are state-of-the-art and energy efficient devices characterised by their silent operation, ease of installation and use, integrated protection against dry running, water hammer, pressure decrease or increase, or motor overload.