Accessories
-
Pump Connection
€ 7.99Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.
Learn More -
Non-Return Valve
€ 9.99The check valve is used to ensure fluid flow in one direction only. Example application: The non-return valve installed at the end of the suction pipe together with the suction basket and inserted into the well, after switching off the pump, prevents the water remaining in the pipe from flowing down, and thus protects the pump against dry running at the next start-up. Installed directly above the hydrophore pump, it protects against the impact of the backflowing liquid.
Learn More -
Rubber firehose
€ 19.99The water hose is designed for forcing and pumping clean, dirty water and septic tanks. It will work with both electric and combustion pumps.
Learn More
The hose is characterized by high thermal and mechanical resistance. It is coated with a soft rubber mass.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
Pressure Regulator
€ 19.99Brass regulators designed to regulate input pressure in water and air systems. They also protect the systems against pressure spikes. Compact size and low-noise operation. Pressure regulators are available in sets with pressure gauges.
Learn More -
FASTfix firehose
€ 34.99Elastic discahrge hoses intended for water and sewerage pumping.Fluid seal technology allow to seal rubber inside of the hose with polyester outside.Resistant to high temperature, pressure and hard to damage.
Learn More
Hoses available in versions:
• In sackcloth braiding (firefighting hose) with quick-fit connectors, with maximum admissible pressure of 8 bar.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
Guide rail system
€ 119.99The coupling set is intended for easy and quick removal of the ZWQ, MWQ, Kraken 1800DF pump from the sewage sump (e.g. for periodic inspection or failure). The pump is lowered on a chain along pipe guides to the coupling body, which enables connection and disconnection of the pump with the discharge pipeline. The pump is not connected to the coupling body by a permanent connection and does not require any disassembly. The pump must be equipped with a horizontal connection ending with an orifice.
Learn More