Accessories
-
Non-return valve for fans CATA
€ 6.99When the fan is turned off, the non-return flap prevents outside air from entering the room and out of hot air. When the fan is running, the non-return flap opens to allow unwanted air to be removed efficiently.
Learn More -
Pump Connection
€ 7.99Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.
Learn More -
Pressure gauge
€ 9.99The manometer is used to measure pressure in the installation. The operating range is from 0 to 10 bar, GZ connector port in ¼” size. Learn More -
Five-Way Connection
€ 9.99Brass port for installation of hydrophore accessories.Diameter of connecting threads: 1” – pump connector, 1” pumping system connector, 1”- connector of anti-vibration hose and tank, %" - manometer connector, %" - pressure switch connector. Outlet available in two sizes: 70 mm and 90mm high.
Learn More -
Pressure switch PC/SK2
€ 9.99The pressure switches are intended for automatic switch on and off of hydrophore sets together surface and deep well pumps equipped with an electric motor. The switches control the device operation, depending on the setting of on and off pressure parameters. The switches have a casing made of plastic, and the contacts are made of copper or silver. Learn More -
-
Non-Return Valve
€ 9.99The check valve is used to ensure fluid flow in one direction only. Example application: The non-return valve installed at the end of the suction pipe together with the suction basket and inserted into the well, after switching off the pump, prevents the water remaining in the pipe from flowing down, and thus protects the pump against dry running at the next start-up. Installed directly above the hydrophore pump, it protects against the impact of the backflowing liquid.
Learn More -
Mating Flange FKV
€ 19.99Mating Flange FKV is designed to connected roof fan to a ventilation shaft which is fixed directly to the fan base.Made of galvanized steel.
Learn More -
Rubber firehose
€ 19.99The water hose is designed for forcing and pumping clean, dirty water and septic tanks. It will work with both electric and combustion pumps.
Learn More
The hose is characterized by high thermal and mechanical resistance. It is coated with a soft rubber mass.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
Brass pump connection
€ 19.99Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.
Learn More