VENTILATION

Mating Flange FKV is designed to connected roof fan to a ventilation shaft which is fixed directly to the fan base.Made of galvanized steel.

Learn More

Modern design and aesthetic look, reliable and low-watt electric motor. Designed for continuous operation, requires no maintance. Equipped with overheating protection. Casing and impeller are made of high-quality durable ABS plastic. UV resistant. Various decorative plates interchangeable for the front panel. Protection rating IP 34 The LD series is a range of decorative extract fans for the domestic environment, like bathroom, toilet, kitchen etc... The range is designed to provide extraction levels that comply with Building Regulations requirements. Surface mounting directly into standard ducting, through the wall or ceiling installation. Learn More

The chimney cap made of galvanized or acid-resistant steel is designed to protect the chimney flue, improve thrust and prevent flue gas back into the chimney.The chimney cap finish chimney flue and protects it from rain, snow or bird's nesting. It is equipped with special clamp that allows it to be mounted on ventilation or flue pipes in easy way.Max. withstand temperatures up to 180°C.

Learn More

Square base made of acid-resistant steel is designed to protect the space around the chimney from adverse weather conditions, further simplifies the installation of the chimney cowl.

Learn More

Modern design and aesthetic look, reliable and low-watt electric motor. Designed for continuous operation, requires no maintance. Equipped with overheating protection. Casing and impeller are made of high-quality durable ABS plastic. UV resistant. Various decorative plates for the front panel of the natural aluminum. Protection rating IP 34 The LD series is a range of decorative extract fans for the domestic environment, like bathroom, toilet, kitchen etc... The range is designed to provide extraction levels that comply with Building Regulations requirements. Surface mounting directly into standard ducting, through the wall or ceiling installation. Learn More

GFK - gravity backdraft damper to prevent air back draft in the system. Such fan configuration that includes KFK mixing chamber and GFK backdraft damper ensures fan motor overheating protection based on BY-PASS actuation, in particular when the motor is not running due to no power supply. This design enables backdraft damper shutting and hot air distribution to other premises through ventilation ducts when the motor is not running.

Learn More

Chimney pot - Flatline Basic- thanks to its dimensions it can be used both in one- and multi-row air-ducts in the process of natural ventilation. The pot can be fixed separately on mounting adapter or on chimney cap which provides sealing security. The ring structure of the pot allows to generate efficient draught in the air-duct in the process of natural ventilation.The chimney pot is made of high-quality PP material, dyed in the mass with stabilizers that make it resistant to UV. Thanks to which it guarantees high resistance to weather conditions and prevents color loss.

Learn More

Chimney pot - Flatline Regular - thanks to its dimensions it can be used both in one- and multi-row air-ducts in the process of natural ventilation. The pot can be fixed separately on mounting adapter or on chimney cap which provides sealing security. The ring structure of the pot allows to generate efficient draught in the air-duct in the process of natural ventilation.The chimney pot is made of high-quality PP material, dyed in the mass with stabilizers that make it resistant to UV. Thanks to which it guarantees high resistance to weather conditions and prevents color loss.

Learn More

The chimney cap extension made of galvanized or acid-resistant steel is designed to protect the chimney flue, improve thrust and prevent flue gas back into the chimney.The chimney cap finish chimney flue and protects it from rain, snow or bird's nesting.

Learn More

The chimney cap extension made of galvanized or acid-resistant steel is designed to protect the chimney flue, improve thrust and prevent flue gas back into the chimney.The chimney cap finish chimney flue and protects it from rain, snow or bird's nesting. To simplify the cleaning it is possible to open the chimney extension. Max. withstand temperatures up to 180°C.

Learn More

If diameter of chimney is not 150/200/250/300 mm it can be connect with chimney cowl by force-in mounting chimney base which allows to connect Turbowent and Rotowent type cowls to a certain pipe chimney ending by pushing the base into the round duct.Base is made for order and delivery time is up to 14 days.

Learn More

Chimney cowl made of acid-resistant steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys.Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

The axial fan from the VENTS VKOM-series is a universal inline fan offering excellent value for money, with the following features: - Impeller made of aluminium - Connection box with cable - Energy saving, ball bearing mounted motor - Overheating protection with automatic restar - Speed controller compatible - Includes mounting fixtures (see technical drawing)

Learn More

The Rotary chimney cowl which uses the wind's force to improve the chimney draught. It  arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow.

Learn More

Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With perimeter aspiration, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years.For any interior: practice, office, living room and especially the bathroom and toilet. Learn More

Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With perimeter aspiration, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years.For any interior: practice, office, living room and especially the bathroom and toilet. Learn More

The VENTS OV1-series is low pressure axial fan in steel casing for wall mounting on a square mounting plate.OV1 offering excellent value for money with the following features:- Impeller made of aluminium - Wall mounting frame- Particularly suitable for external mounting- Energy saving, ball bearing mounted motor- Overheating protection with automatic restart- Speed controller compatible

Learn More

Axial window fan with automatic louver shutters for exhaust ventilation with the capacity up to 455 m3/h. Flange mounting sizes 180 mm and 230 mm. Learn More

The VENTS TT and VENTS TT PRO fans are featured with wide capabilities and high performance of axial and centrifugal fans and are specifically designed for supply and exhaust ventilation of premises requiring high pressure, powerful air flow and low noise level. The fans are compatible with round air ducts from Ø 100 to 315 mm. Exhaust ventilation systems based on the VENTS TT fans are the best solution for ventilation of bathrooms and kitchens and other humid premises as well for ventilation of flats, cottages, shops, cafes, etc.

Learn More

The Turbowent Tulipan is a chimney cowl which uses the wind's force to improve the chimney draught. The Tulipan arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow. The construction of this chimney cowl allows to mount it on ducts which are very close to each other.

Learn More

The Turbowent Tulipan is a chimney cowl which uses the wind's force to improve the chimney draught. The Tulipan arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow. The construction of this chimney cowl allows to mount it on ducts which are very close to each other.

Learn More

The Turbowent Tulipan is a chimney cowl which uses the wind's force to improve the chimney draught. The Tulipan arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow. The construction of this chimney cowl allows to mount it on ducts which are very close to each other.

Learn More

Rotary chimney cowl Turbowent is a device, which, in a dynamic way, uses force of the wind to increase chimney draught. The turbine always rotates in the same direction no matter of the wind strength or its direction. It is to be mounted on gravitation based ventilation chimney duct endings, esspecialy on individual and multi storey housing and.Maximum withstand temperature: 150°C

Learn More

The Turbowent Tulipan is a chimney cowl which uses the wind's force to improve the chimney draught. The Tulipan arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow. The construction of this chimney cowl allows to mount it on ducts which are very close to each other.

Learn More

Chimney cowl made of acid-resistant steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys.The use of a high-quality ball bearing above the body guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl.Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

The VENTS TT and VENTS TT PRO fans are featured with wide capabilities and high performance of axial and centrifugal fans and are specifically designed for supply and exhaust ventilation of premises requiring high pressure, powerful air flow and low noise level. The fans are compatible with round air ducts from Ø 100 to 315 mm. Exhaust ventilation systems based on the VENTS TT fans are the best solution for ventilation of bathrooms and kitchens and other humid premises as well for ventilation of flats, cottages, shops, cafes, etc.

Learn More

Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

BAN thermostatic bypass with special damper and metal filter is used to prepare air coming into the hot air ventilator. It protects the hot air ventilator from overheating (when motor is not working, for example due to a lack of electricity) by shutting the valve and ejecting air through a damper to another room. Bypass also stabilizes temperature in the system, by opening a damper and sucking cool air, when the air coming into the ventilator is too hot. Bypass is also equipped with a metal filter.

Learn More

FFK – removable G3 metal filter-box for transported air purification. The filter is connected to the fan casing by lock-latches to provide easy removal of the filter for cleaning.

Learn More

The axial fan from the VENTS OV-series is a universal industrial fan offering excellent value for money with the following features: - Wall mounting frame; - Particularly suitable for external mounting ; - Energy saving, ball bearing mounted motor ; - Overheating protection with automatic restart ; - Speed controller compatible

Learn More

Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With LED - display, Hygrosteuerung, tracking function, Randabsaugung, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years. For any interior: Practice, office, living room and especially the bathroom and toilet.

Hygro (humidistat). With lighted LED-Display. Adjustable humidity detector from 40% to 95%, and adjustable electronic Timer 0-15 minutes.

The Model E - GLASS DISPLAY allows continuous ventilation   (24 hours) from rooms with high humidity by activating the switch S1. If the humidity exceeds the adjusted humidity level, the Hygro function is activated and the fan operates at the highest level. Decreases the degree of humidity again below the set value, the unit turns in the case of S1 = OFF from, or at S1 = ON to the low level back. The room fan will be switched to the high level when the light switch of the space is switched on. After turning off the light switch, the device is still on during the timer set time at a maximum level and eventually shuts down in the case of S1 = OFF, or at S1 = ON to the low level back

Learn More

Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

Extremely quiet axial fan for any interior, especially to the bathroom and toilet but also office and living room. Low power consumption. Quiet operation. Characteristic modern design and high quality.

Hygro (humidistat). With lighted LED-Display. Adjustable humidity detector from 40% to 95%, and adjustable electronic Timer 0-15 minutes.

The Model E - GLASS DISPLAY allows continuous ventilation   (24 hours) from rooms with high humidity by activating the switch S1. If the humidity exceeds the adjusted humidity level, the Hygro function is activated and the fan operates at the highest level. Decreases the degree of humidity again below the set value, the unit turns in the case of S1 = OFF from, or at S1 = ON to the low level back. The room fan will be switched to the high level when the light switch of the space is switched on. After turning off the light switch, the device is still on during the timer set time at a maximum level and eventually shuts down in the case of S1 = OFF, or at S1 = ON to the low level back

Learn More

In-line centrifugal fan in steel casing with air capacity up to 1880 M3/H. The impeller with backward blades is powered by the single phase motor with external rotor and overheating protection with automatic restart. The motor is equipped with ball bearings for long service life, designed for at least 40.000 hours. Motor protection rating IP44. Learn More

Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

The roof fan HAVACO RCM-series is a universal roof fan which works in exhaust or supply mode in ventilation systems. The fan is equipped with a motor with ball bearing and a cover. This provides protection from adverse weather conditions. Learn More

Chimney cowl with external bearing made of carbon steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

Chimney cowl with external bearing made of carbon steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

Self adjusting chimney cowl is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.Powder coated chimney cowl. Dispatch time 2-3 weeks.

Learn More

Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.

Learn More

The VENTS TT Silent-M fans are recommended as a component of the air handling systems for various commercial and industrial premises with high requirements to noise level, i.e. in libraries, conference halls, educational institutions, kindergartens, etc. Learn More

The centrifugal roof fan VENTS VKMK-series is a universal roof fan used to increase the draught in ventilation systems. The fan is equipped with a motor with ball bearing and a cover. This provides protection from adverse weather conditions. Learn More

Chimney fans for hot air distribution allow creating fully-featured air heating system based on a fireplace. Such system is the perfect solution for heating of seasonal houses that serve as a second residence during winter time and provides fast and efficient hot air distribution from chimney to other premises. Used for air distribution with the air tempreature range 0°С to +150°С.

Learn More

The Rotary chimney cowl witch external bearings uses the wind's force to improve the chimney draught. It arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow.Maximum withstand temperature: 250°C.

Learn More

AN hot air ventilator is designed to distribute hot air from fireplace hood to rooms in the building. It has a thermically and acoustically insulated ventilator and a thermostat. When temperature on the probe reaches the value set, the ventilator turns on automatically. It turns off when temperature falls down under a value set.

Learn More

The Rotary chimney cowl witch external bearings uses the wind's force to improve the chimney draught. It arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow.Maximum withstand temperature: 250°C.

Learn More

The Rotary chimney cowl witch external bearings uses the wind's force to improve the chimney draught. It arranges an ideal combustion, because the turbine always rotates in the same direction, independent of the wind's strength or direction. It also protects the chimney from outside influences like rain or snow.Maximum withstand temperature: 250°C.

Learn More