Search results for 'ibo iho 40/80'

UV sterilizers are used to purify/disinfect water from bacteriological contamination that may exist in water sources, e.g. shallow wells or surface intakes. Disinfection is based on the bactericidal effect of the UV lamps in the sterilizer. The principle of their bactericide action is the absorption of UV light by the DNA structures of microorganisms. Proper selection of UV rays strength and exposure time can kill almost all microorganisms by destroying their DNA.

The Magnetic Filter has been designed to retain impurities in central heating systems.Modern systems equipped with highly efficient systems powered by boilers are exposed to failures and reduced efficiency and effectiveness work through contamination with iron oxides, i.e. the main component of rust, which are formed as a result of corrosion and deposited in the form of sediment. Iron oxide particles circulate throughout the heating circuit, accumulating in critical points of the installation and exposing the entire system to failure e.g. pumps, valves or heat exchangers, and the heating efficiency of the boiler itself decreases, which translates into increased heating costs. The use of magnetic filters/dirt separators makes it possible to increase the protection of the entire heating system by removal of most solid contaminants, which include iron or iron oxides suspended in the heating system fluid. Filters can be used in systems with continuous circulation of the heating medium. The heating medium may consist of a water solution and glycol, where the glycol content does not exceed 50%. Filters can also be used in solar and refrigeration systems by stopping additional impurities such as sand.

WZI-AUTO 900 is a compact device designed to provide households with clean water from their own water intakes (wells) or to increase pressure from the water supply network. The pumps are equipped with a frequency inverter that guarantees constant pressure in all water taps, soft starts of the motor and lower current consumption compared to classical pressure boosting plants. The pumps with an integrated frequency inverter are state-of-the-art and energy efficient devices characterised by their silent operation, ease of installation and use, integrated protection against dry running, water hammer, pressure decrease or increase, or motor overload.

The BETA 2 pumps are designed for forcing circulation in central heating systems and solar systems. The pumps are equipped with an electronic processor for automatic pump control, which together with a frequency converter allows for significant energy savings. The processor provides 11 operating modes depending on the system requirements. The power consumption is from 1/10 to 1/3 of conventional pumps.The pump is supplied with union joints and power cable.

Compared to traditional circulation pumps, using the permanent magnet motor allows to reduce the energy consumption of the E-IBO pumps to as low as 3W depending on the system. The pumps are equipped with a spherical impeller operating in various planes.

The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).

The circulating pump of the heating is also called heating pump. In the heating system, it ensures the circulation of the heating water in the system. IBO OHI pumps are made of high quality materials and economical. Manual speed-speed controllers ensure optimal adaptation to the system by means of practical characteristics. Suitable for almost all heating and air-conditioning systems (+ 2 ° C to + 110 ° C).

OHI PRO series are seal-less circulation pumps with increased durability. The pumps have a higher density ceramic shaft and plain bearings. Motor durability and better electrical parameters are achieved by using stronger Class F insulation winding. All processes during the manufacture of OHI PRO pumps are carried out by robots. The robots also check the quality of the intermediate products after each stage of production. At the end, the pumps are electrically and hydraulically tested. Due to the automation of the manufacturing process, the final product is of the top quality that is reproducible in every unit. All these actions have allowed us to extend the warranty period to 3 years. The pumps are supplied with union joints and a cable with a plug.

OHI PRO series are seal-less circulation pumps with increased durability. The pumps have a higher density ceramic shaft and plain bearings. Motor durability and better electrical parameters are achieved by using stronger Class F insulation winding. All processes during the manufacture of OHI PRO pumps are carried out by robots. The robots also check the quality of the intermediate products after each stage of production. At the end, the pumps are electrically and hydraulically tested. Due to the automation of the manufacturing process, the final product is of the top quality that is reproducible in every unit. All these actions have allowed us to extend the warranty period to 3 years. The pumps are supplied with union joints and a cable with a plug.