Accessories
-
Non-return valve for fans CATA
Excl. Tax: € 5.68 Incl. Tax: € 6.99When the fan is turned off, the non-return flap prevents outside air from entering the room and out of hot air. When the fan is running, the non-return flap opens to allow unwanted air to be removed efficiently.
Learn More -
Pump Connection
Excl. Tax: € 6.50 Incl. Tax: € 7.99Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.
Learn More -
Pressure gauge
Excl. Tax: € 8.12 Incl. Tax: € 9.99The manometer is used to measure pressure in the installation. The operating range is from 0 to 10 bar, GZ connector port in ¼” size. Learn More -
Five-Way Connection
Excl. Tax: € 8.12 Incl. Tax: € 9.99Brass port for installation of hydrophore accessories.Diameter of connecting threads: 1” – pump connector, 1” pumping system connector, 1”- connector of anti-vibration hose and tank, %" - manometer connector, %" - pressure switch connector. Outlet available in two sizes: 70 mm and 90mm high.
Learn More -
Pressure switch PC/SK2
Excl. Tax: € 8.12 Incl. Tax: € 9.99The pressure switches are intended for automatic switch on and off of hydrophore sets together surface and deep well pumps equipped with an electric motor. The switches control the device operation, depending on the setting of on and off pressure parameters. The switches have a casing made of plastic, and the contacts are made of copper or silver. Learn More -
-
Non-Return Valve
Excl. Tax: € 8.12 Incl. Tax: € 9.99The check valve is used to ensure fluid flow in one direction only. Example application: The non-return valve installed at the end of the suction pipe together with the suction basket and inserted into the well, after switching off the pump, prevents the water remaining in the pipe from flowing down, and thus protects the pump against dry running at the next start-up. Installed directly above the hydrophore pump, it protects against the impact of the backflowing liquid.
Learn More -
Mating Flange FKV
Excl. Tax: € 16.25 Incl. Tax: € 19.99Mating Flange FKV is designed to connected roof fan to a ventilation shaft which is fixed directly to the fan base.Made of galvanized steel.
Learn More -
Rubber firehose
Excl. Tax: € 16.25 Incl. Tax: € 19.99The water hose is designed for forcing and pumping clean, dirty water and septic tanks. It will work with both electric and combustion pumps.
Learn More
The hose is characterized by high thermal and mechanical resistance. It is coated with a soft rubber mass.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
Brass pump connection
Excl. Tax: € 16.25 Incl. Tax: € 19.99Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.
Learn More -
Pressure Regulator
Excl. Tax: € 16.25 Incl. Tax: € 19.99Brass regulators designed to regulate input pressure in water and air systems. They also protect the systems against pressure spikes. Compact size and low-noise operation. Pressure regulators are available in sets with pressure gauges.
Learn More -
Square base for chimney cowl 0,6mm
Excl. Tax: € 24.38 Incl. Tax: € 29.99Square base made of acid-resistant steel is designed to protect the space around the chimney from adverse weather conditions, further simplifies the installation of the chimney cowl.
Learn More -
Pressure switch PC-2
Excl. Tax: € 24.38 Incl. Tax: € 29.99The pressure switches are intended for automatic switch on and off of hydrophore sets together surface and deep well pumps equipped with an electric motor. The switches control the device operation, depending on the setting of on and off pressure parameters. The switches have a casing made of plastic, and the contacts are made of copper or silver. Learn More -
FASTfix firehose
Excl. Tax: € 28.45 Incl. Tax: € 34.99Elastic discahrge hoses intended for water and sewerage pumping.Fluid seal technology allow to seal rubber inside of the hose with polyester outside.Resistant to high temperature, pressure and hard to damage.
Learn More
Hoses available in versions:
• In sackcloth braiding (firefighting hose) with quick-fit connectors, with maximum admissible pressure of 8 bar.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
PC-15 Pump Controller
Excl. Tax: € 28.45 Incl. Tax: € 34.99Automaton controlling operation of surface and deep well pumps with power up to 1100 W. It replaces the pressure switch and hydrophore tank. Opening the tap sends a signal to PC-15 automaton which starts the pump. Closing the tap makes PC-15 stop the pump. The automaton can match with one-phase pumps the power consumption of which does not exceed 12A during operation. The device provided with protection against dry run. When the well runs out of water, the devices stops the pump. The device equipped with a 60 cm long cable intended for connection to the pump and 1m long power cable. PC-15 is equipped with 1" diameter ports.
Learn More -
GFK gravity backdraft damper
Excl. Tax: € 28.45 Incl. Tax: € 34.99GFK - gravity backdraft damper to prevent air back draft in the system. Such fan configuration that includes KFK mixing chamber and GFK backdraft damper ensures fan motor overheating protection based on BY-PASS actuation, in particular when the motor is not running due to no power supply. This design enables backdraft damper shutting and hot air distribution to other premises through ventilation ducts when the motor is not running.
Learn More -
RS-1-300 Speed Controller
Excl. Tax: € 32.51 Incl. Tax: € 39.99Motor speed controller RS-1-400 (under surface mounted) is used to control rotating speed of single - phase motors. It can be used in situation where the motor speed is governed by adjusting the effective voltage given to the winding.
Learn More -
Switch P2-10
Excl. Tax: € 32.51 Incl. Tax: € 39.99 -
PRT Base Reduction
Excl. Tax: € 36.58 Incl. Tax: € 44.99If diameter of chimney is not 150/200/250/300 mm it can be connect with chimney cowl by force-in mounting chimney base which allows to connect Turbowent and Rotowent type cowls to a certain pipe chimney ending by pushing the base into the round duct.Base is made for order and delivery time is up to 14 days.
Learn More -
RS-1-400 Speed Controller
Excl. Tax: € 40.64 Incl. Tax: € 49.99Motor speed controller RS-1-400 is used to control rotating speed of single - phase motors. It can be used in situation where the motor speed is governed by adjusting the effective voltage given to the winding.
Learn More