Accessories

When the fan is turned off, the non-return flap prevents outside air from entering the room and out of hot air. When the fan is running, the non-return flap opens to allow unwanted air to be removed efficiently.

Learn More

Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.

Learn More

The manometer is used to measure pressure in the installation. The operating range is from 0 to 10 bar, GZ connector port in ¼” size. Learn More

Brass port for installation of hydrophore accessories.Diameter of connecting threads: 1” – pump connector, 1” pumping system connector, 1”- connector of anti-vibration hose and tank, %" - manometer connector, %" - pressure switch connector. Outlet available in two sizes: 70 mm and 90mm high.

Learn More

The pressure switches are intended for automatic switch on and off of hydrophore sets together surface and deep well pumps equipped with an electric motor. The switches control the device operation, depending on the setting of on and off pressure parameters. The switches have a casing made of plastic, and the contacts are made of copper or silver. Learn More

Ball valve for circulating pump

Learn More

The check valve is used to ensure fluid flow in one direction only. Example application: The non-return valve installed at the end of the suction pipe together with the suction basket and inserted into the well, after switching off the pump, prevents the water remaining in the pipe from flowing down, and thus protects the pump against dry running at the next start-up. Installed directly above the hydrophore pump, it protects against the impact of the backflowing liquid.

Learn More

Mating Flange FKV is designed to connected roof fan to a ventilation shaft which is fixed directly to the fan base.Made of galvanized steel.

Learn More

The water hose is designed for forcing and pumping clean, dirty water and septic tanks. It will work with both electric and combustion pumps.
The hose is characterized by high thermal and mechanical resistance. It is coated with a soft rubber mass.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps

Learn More

Pump screw connection / fitting set (2 pcs) for heating pump. This is a necessary part that allows you to connect the device with the installation. The element ensures durability and tightness of the installation and the safety of the entire system.

Learn More

Brass regulators designed to regulate input pressure in water and air systems. They also protect the systems against pressure spikes. Compact size and low-noise operation. Pressure regulators are available in sets with pressure gauges.

Learn More

Square base made of acid-resistant steel is designed to protect the space around the chimney from adverse weather conditions, further simplifies the installation of the chimney cowl.

Learn More

The pressure switches are intended for automatic switch on and off of hydrophore sets together surface and deep well pumps equipped with an electric motor. The switches control the device operation, depending on the setting of on and off pressure parameters. The switches have a casing made of plastic, and the contacts are made of copper or silver. Learn More

Elastic discahrge hoses intended for water and sewerage pumping.Fluid seal technology allow to seal rubber inside of the hose with polyester outside.Resistant to high temperature, pressure and hard to damage.
Hoses available in versions:
• In sackcloth braiding (firefighting hose) with quick-fit connectors, with maximum admissible pressure of 8 bar.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps

Learn More