SUBMERSIBLE PUMPS

The water hose is designed for forcing and pumping clean, dirty water and septic tanks. It will work with both electric and combustion pumps.
The hose is characterized by high thermal and mechanical resistance. It is coated with a soft rubber mass.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps

Elastic discahrge hoses intended for water and sewerage pumping.Fluid seal technology allow to seal rubber inside of the hose with polyester outside.Resistant to high temperature, pressure and hard to damage.
Hoses available in versions:
• In sackcloth braiding (firefighting hose) with quick-fit connectors, with maximum admissible pressure of 8 bar.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps

105 mm diameter vibration pumps for irrigation. Due to their high efficiency, NEMO and VM60 submersible vibration pumps are perfect for irrigation with clean water. Despite the small size, the pump design based on solenoids allows creating high pressure required for irrigation. Due to their compact size and low weight, vibration pumps are very popular among allotment gardeners. Pumps are equipped with a 10 m power cable. Pump housing is made of aluminium. Compact-size Nemo and VM60 pumps can operate even in small wells. The minimum diameter of a drilled well in which the pump can be used is 120 mm.

IP submersible plastic pumps designed for pumping clean and slightly contaminated water. The pumps have an outlet connection to which discharge hoses of different diameters can be connected depending on the user's requirements. Small size and light weight make the pumps exceptionally easy to operate and maintain. The pumps are equipped with float switches for automatic pump control. All pumps are supplied with thermal protection mounted in the motor winding. IP INOX pumps have a similar design to IP pumps but their housing is made of high quality AISI 304 stainless steel.

Submersible sewage and dirty water pump used mainly for emptying of flooded rooms and swimming pools, lakes, ponds or wells.

Submersible pumps designed for pumping sewage and water from flooded premises. The pump is available with a float switch for automatic operation control or without the float switch. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. Magnum pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of aluminium and the impeller is made of cast iron. Magnum 2500 and 2900 pumps are available with and without the float switch.

Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.

Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.

Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.