SUBMERSIBLE PUMPS
Submersible pumps are designed for use in immersion tanks and chambers flooded with liquid water. Depending on the implementation of structural and material can be used for pumping clean water, contaminated, municipal and industrial wastewater.
- Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
- Submersible sewage and dirty water pump with grinder used mainly for emptying of cesspits, septic tanks or flooded rooms.
-
Rubber firehose
Excl. Tax: € 16.25 Incl. Tax: € 19.99The water hose is designed for forcing and pumping clean, dirty water and septic tanks. It will work with both electric and combustion pumps.
Learn More
The hose is characterized by high thermal and mechanical resistance. It is coated with a soft rubber mass.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
FASTfix firehose
Excl. Tax: € 28.45 Incl. Tax: € 34.99Elastic discahrge hoses intended for water and sewerage pumping.Fluid seal technology allow to seal rubber inside of the hose with polyester outside.Resistant to high temperature, pressure and hard to damage.
Learn More
Hoses available in versions:
• In sackcloth braiding (firefighting hose) with quick-fit connectors, with maximum admissible pressure of 8 bar.
Application:
Water drainage from exacavations and flooded rooms, pumping out sewerage, water from lakes, ponds, rivers using submersible pumps -
Vibration Pump
Excl. Tax: € 40.64 Incl. Tax: € 49.99105 mm diameter vibration pumps for irrigation. Due to their high efficiency, NEMO and VM60 submersible vibration pumps are perfect for irrigation with clean water. Despite the small size, the pump design based on solenoids allows creating high pressure required for irrigation. Due to their compact size and low weight, vibration pumps are very popular among allotment gardeners. Pumps are equipped with a 10 m power cable. Pump housing is made of aluminium. Compact-size Nemo and VM60 pumps can operate even in small wells. The minimum diameter of a drilled well in which the pump can be used is 120 mm.
Learn More -
Submersible Pump IP
Excl. Tax: € 52.84 Incl. Tax: € 64.99IP submersible plastic pumps designed for pumping clean and slightly contaminated water. The pumps have an outlet connection to which discharge hoses of different diameters can be connected depending on the user's requirements. Small size and light weight make the pumps exceptionally easy to operate and maintain. The pumps are equipped with float switches for automatic pump control. All pumps are supplied with thermal protection mounted in the motor winding. IP INOX pumps have a similar design to IP pumps but their housing is made of high quality AISI 304 stainless steel.
Learn More -
Submersible Pump TA511
Excl. Tax: € 56.90 Incl. Tax: € 69.99Submersible sewage and dirty water pump used mainly for emptying of flooded rooms and swimming pools, lakes, ponds or wells.
Learn More -
Sewage Pump Magnum
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible pumps designed for pumping sewage and water from flooded premises. The pump is available with a float switch for automatic operation control or without the float switch. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. Magnum pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of aluminium and the impeller is made of cast iron. Magnum 2500 and 2900 pumps are available with and without the float switch.
Learn More -
Sludge Pump TA502
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
Sludge Pump KD753
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
Sludge Pump KD758
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
Slurry Pump M79910
Excl. Tax: € 73.16 Incl. Tax: € 89.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
Slurry pump SWQ
Excl. Tax: € 81.29 Incl. Tax: € 99.99Submersible pumps designed for pumping clean and slightly contaminated water.Due to the top quality stainless steel design, the pumps ensure long-term and reliable operation. The motor is equipped with thermal protection mounted in the winding.The pumps have a cooling jacket so that they do not have to be fully submerged.Compared to other SWQ pumps, the F marked pump provides a very high flow of up to 830 l/min. All pumps except the SWQ180 have impellers made of stainless steel and are equipped with float switches for operation control. Due to small size (12 cm diameter), the SWQ180 pumps can be used to extract water from small, narrow wells. The pumps do not have a float.
Learn More -
Submersible pump WQF
Excl. Tax: € 81.29 Incl. Tax: € 99.99Submersible pumps designed for pumping sewage, dirty water, and water from flooded premises. The pumps are equipped with float switches for automatic pump control. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. WQF pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of AISI304 stainless steel, and the impeller is made of grey cast iron.
Learn More -
Guide rail system
Excl. Tax: € 97.55 Incl. Tax: € 119.99The coupling set is intended for easy and quick removal of the ZWQ, MWQ, Kraken 1800DF pump from the sewage sump (e.g. for periodic inspection or failure). The pump is lowered on a chain along pipe guides to the coupling body, which enables connection and disconnection of the pump with the discharge pipeline. The pump is not connected to the coupling body by a permanent connection and does not require any disassembly. The pump must be equipped with a horizontal connection ending with an orifice.
Learn More -
Cesspool Pump KD760
Excl. Tax: € 105.68 Incl. Tax: € 129.99Submersible sewage and dirty water pump with grinder used mainly for emptying of cesspits, septic tanks or flooded rooms.This high efficient pump easily shreds e.g textiles such as cloths, diapers, tights, etc.
Learn More -
Sewage Pump V
Excl. Tax: € 105.68 Incl. Tax: € 129.99Submersible pumps with cutting system designed for pumping domestic sewage. In case of flooding, they can be used for draining rooms. Their robust design and quality materials used (stainless steel, cast iron), the cutting system with a cutting knife, and very reasonable price have made the pumps very popular among individual customers. The pumps are equipped with a float switch for automatic operation. To ensure reliable operation, the pumps have overload protection mounted on the cable. V 550, V1500 and V2200 pumps incorporate the high efficiency “screw” cutting system. Pump outlet provides connection of the discharge hose with a hose clamp or fast-connection.
Learn More -
Slurry Pump M79909
Excl. Tax: € 109.75 Incl. Tax: € 134.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
Sewage Pump M79900
Excl. Tax: € 113.81 Incl. Tax: € 139.99ORCA is submersible sewage and dirty water pump with grinder used mainly for emptying of cesspits, septic tanks or flooded rooms.
Learn More -
Cesspool Pump KD764
Excl. Tax: € 139.99 Incl. Tax: € 139.99Submersible sewage and dirty water pump with 3-stage grinder used mainly for emptying of cesspits, septic tanks or flooded rooms.This high efficient pump easily shreds e.g textiles such as gloves, cloths, diapers, tights, bags etc.
Learn More -
Sewage Pump CTR
Excl. Tax: € 138.20 Incl. Tax: € 169.99CTR cast iron pump equipped with a grinding system with a cutting knife due to which solid elements included in pumped medium are disintegrated. A float switch is mounted in the pump, allowing for automatic device opreation. In order to improve fault-free operation, the pump is equipped with overload protection mounted on the cable. The cast iron structure make the pump resistant to mechanical damage and chemical corrosion.
Learn More -
Sewage Pump FURIATKA
Excl. Tax: € 146.33 Incl. Tax: € 179.99Submersible cast iron pumps with cutting system. The pumps are designed for pumping domestic sewage and draining flooded rooms. In order to minimize the risk of clogging, the pumps are equipped with an exceptionally effective "screw" cutting system. To ensure reliable operation, the pumps have overload protection mounted on the cable. To prevent motor overloading, the protection will stop the pump. The cast iron construction makes the pumps resistant to mechanical damage and chemical corrosion. The pumps are equipped with a float switch for automatic operation control, and the pump outlet provides connection of the discharge hose with a hose clamp or fast-connection. Their robust design and exceptionally effective cutting system have made the Furiatka series one of the most popular pumps with cutting system on the market.
Learn More -
Sludge Pump 50 KBFU
Excl. Tax: € 199.18 Incl. Tax: € 244.99Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.
Learn More -
MWQ pump with AGITATOR
Excl. Tax: € 211.37 Incl. Tax: € 259.99A series of professional submersible pumps with mixing system, designed for customers who need a strong and reliable product in their professional work. These pumps are widely used in sewage pumping stations. MWQ pumps are designed for pumping raw sewage from pumping stations where dense sludge may be deposited. The pumps have a special additional external rotor (agitator) for mixing and splitting heavy sludge. Materials used guarantee long-term and faultless operation. Motor shaft is made of stainless steel. Motor chamber is sealed with a double SiC/ SiC mechanical seal. The pump uses a multi-channel impeller for pumping large diameter impurities. All MWQ pumps are suitable for installation with a guide rail system. The motors have Class F winding insulation and single-phase versions are additionally equipped with thermal protection mounted in the winding. The pumps have bearings manufactured by NSK in Japan. Flanges for connecting pipes or fast-connection. The pumps are available as single-phase 230V ~/ 50Hz versions with a float switch, and 3-phase 400V ~ 3 / 50Hz version. The pumps can be supplied with guide rail systems for installation in pump stations. The guide rail system is sold separately.
Learn More