PLUMBING

Submersible pumps designed for pumping clean and slightly contaminated water.Due to the top quality stainless steel design, the pumps ensure long-term and reliable operation. The motor is equipped with thermal protection mounted in the winding.The pumps have a cooling jacket so that they do not have to be fully submerged.Compared to other SWQ pumps, the F marked pump provides a very high flow of up to 830 l/min. All pumps except the SWQ180 have impellers made of stainless steel and are equipped with float switches for operation control. Due to small size (12 cm diameter), the SWQ180 pumps can be used to extract water from small, narrow wells. The pumps do not have a float.

Submersible pumps designed for pumping sewage, dirty water, and water from flooded premises. The pumps are equipped with float switches for automatic pump control. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. WQF pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of AISI304 stainless steel, and the impeller is made of grey cast iron.

Single-stage self-priming centrifugal surface pump equipped with the Venturi tube system for increased suction capacity, designed for pumping of clean cold water from own intakes and for increasing pressure. Sections of pump body and shaft that come in contact with water are made of stainless steel (INOX design). The pump has a power cable with a plug. The pump motor is provided with thermal protection.

The deep well screw pump is ideal for use in single and multi-family houses, recreational plots, farms, production plants, it is perfect for irrigation. Designed for pumping water from drilled deep water intakes, ring wells and free-standing tanks. Learn More

75mm deep well displacement pumps (SQIBO/3”SCR). The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pumps are equipped with power cables of varying lengths terminated with a plug. Due to the capacitor built into the motor, the pump is ready for installation immediately after unpacking. The pump is equipped with thermal protection mounted in the motor winding. SQIBO and SCR pumps are among the most popular screw pumps available on the Polish market. The pumps are recognized by customers for their robust design and attractive price.

Compared to traditional circulation pumps, using the permanent magnet motor allows to reduce the energy consumption of the E-IBO pumps to as low as 3W depending on the system. The pumps are equipped with a spherical impeller operating in various planes.

Submersible pumps with cutting system designed for pumping domestic sewage. In case of flooding, they can be used for draining rooms. Their robust design and quality materials used (stainless steel, cast iron), the cutting system with a cutting knife, and very reasonable price have made the pumps very popular among individual customers. The pumps are equipped with a float switch for automatic operation. To ensure reliable operation, the pumps have overload protection mounted on the cable. V 550, V1500 and V2200 pumps incorporate the high efficiency “screw” cutting system. Pump outlet provides connection of the discharge hose with a hose clamp or fast-connection.

Group of multi-stage self-priming centrifugal pumps designed for pumping of clean cold water from own intakes and for increasing pressure.The pumps are equipped with the Venturi tube system for increased suction capacity. MHI pumps are available in two variants: with stainless steel impellers (INOX design) or with noryl impellers. All pumps have a stainless steel body. Due to low-noise operation, the pumps can be installed inside the houses. The pumps are equipped with thermal protection mounted in the motor winding.

2 "STING is the first and at the moment the only IBO 2” deep well displacement pump. The diameter of the pump does not exceed 53 mm and the hydraulic section consists of the stator, rotor and clutch. The pump is mainly made of stainless steel. The pump is equipped with a 14 m cable terminated with a plug and the capacitor is built into the motor so that pump is ready for installation immediately after unpacking. The pump is equipped with thermal protection mounted in the motor winding.