Search results for 'cata e-100 gth'
-
Non-return valve for fans CATA
Excl. Tax: € 5.68 Incl. Tax: € 6.99When the fan is turned off, the non-return flap prevents outside air from entering the room and out of hot air. When the fan is running, the non-return flap opens to allow unwanted air to be removed efficiently.
Learn More -
BATHROOM FAN CATA E-100 BLACK
Excl. Tax: € 65.03 Incl. Tax: € 79.99Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With perimeter aspiration, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years.For any interior: practice, office, living room and especially the bathroom and toilet. Learn More -
BATHROOM FAN CATA E-100 GTH
Excl. Tax: € 139.99 Incl. Tax: € 139.99Extremely quiet axial fan for any interior, especially to the bathroom and toilet but also office and living room. Low power consumption. Quiet operation. Characteristic modern design and high quality.
Hygro (humidistat). With lighted LED-Display. Adjustable humidity detector from 40% to 95%, and adjustable electronic Timer 0-15 minutes.
The Model E - GLASS DISPLAY allows continuous ventilation (24 hours) from rooms with high humidity by activating the switch S1. If the humidity exceeds the adjusted humidity level, the Hygro function is activated and the fan operates at the highest level. Decreases the degree of humidity again below the set value, the unit turns in the case of S1 = OFF from, or at S1 = ON to the low level back. The room fan will be switched to the high level when the light switch of the space is switched on. After turning off the light switch, the device is still on during the timer set time at a maximum level and eventually shuts down in the case of S1 = OFF, or at S1 = ON to the low level back
Learn More -
BATHROOM FAN CATA E-100 GSTH
Excl. Tax: € 113.81 Incl. Tax: € 139.99Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With LED - display, Hygrosteuerung, tracking function, Randabsaugung, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years. For any interior: Practice, office, living room and especially the bathroom and toilet.
Hygro (humidistat). With lighted LED-Display. Adjustable humidity detector from 40% to 95%, and adjustable electronic Timer 0-15 minutes.
The Model E - GLASS DISPLAY allows continuous ventilation (24 hours) from rooms with high humidity by activating the switch S1. If the humidity exceeds the adjusted humidity level, the Hygro function is activated and the fan operates at the highest level. Decreases the degree of humidity again below the set value, the unit turns in the case of S1 = OFF from, or at S1 = ON to the low level back. The room fan will be switched to the high level when the light switch of the space is switched on. After turning off the light switch, the device is still on during the timer set time at a maximum level and eventually shuts down in the case of S1 = OFF, or at S1 = ON to the low level back
Learn More -
BATHROOM FAN CATA E-100 Silver
Excl. Tax: € 65.03 Incl. Tax: € 79.99Axial small room fan with removable silver - gray colored glass front. To clean the front panel is easily removable without tools.With perimeter aspiration, very low power consumption and extremely quiet operation.Thanks to glass front, there is no risk of yellowing even after years.For any interior: practice, office, living room and especially the bathroom and toilet. Learn More -
Grundfos Scala1 5-55 Pump
Excl. Tax: € 599.99 Incl. Tax: € 599.99The Grundfos SCALA1 is a self-priming, multistage pump, that incorporates all the components of a pressure booster into a compact composite enclosure. As it is self-priming, the SCALA1 can pump water from a level below the pump. Provided it is filled with water, the pump can lift water from a depth of 8 m in less than 5 minutes. This facilitates easy installation and start-up of the pump and provides more reliable water supply in installations where there is a risk of dry running and leakages in suction hose or pipes.
Learn More -
Submersible pump WQF
Excl. Tax: € 81.29 Incl. Tax: € 99.99Submersible pumps designed for pumping sewage, dirty water, and water from flooded premises. The pumps are equipped with float switches for automatic pump control. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. WQF pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of AISI304 stainless steel, and the impeller is made of grey cast iron.
Learn More -
MWQ pump with AGITATOR
Excl. Tax: € 211.37 Incl. Tax: € 259.99A series of professional submersible pumps with mixing system, designed for customers who need a strong and reliable product in their professional work. These pumps are widely used in sewage pumping stations. MWQ pumps are designed for pumping raw sewage from pumping stations where dense sludge may be deposited. The pumps have a special additional external rotor (agitator) for mixing and splitting heavy sludge. Materials used guarantee long-term and faultless operation. Motor shaft is made of stainless steel. Motor chamber is sealed with a double SiC/ SiC mechanical seal. The pump uses a multi-channel impeller for pumping large diameter impurities. All MWQ pumps are suitable for installation with a guide rail system. The motors have Class F winding insulation and single-phase versions are additionally equipped with thermal protection mounted in the winding. The pumps have bearings manufactured by NSK in Japan. Flanges for connecting pipes or fast-connection. The pumps are available as single-phase 230V ~/ 50Hz versions with a float switch, and 3-phase 400V ~ 3 / 50Hz version. The pumps can be supplied with guide rail systems for installation in pump stations. The guide rail system is sold separately.
Learn More -
BLACK SLIDE 0,6mm CHIMNEY COWL
Excl. Tax: € 97.55 Incl. Tax: € 119.99Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More -
BLACK B 0,6mm CHIMNEY COWL
Excl. Tax: € 146.33 Incl. Tax: € 179.99Chimney cowl with external bearing made of 1.4404 chimney steel is designed to support gravitational exhaust ventilation and draft in flue, smoke and ventilation chimneys. Using a high-quality ball bearing above the body of chimney cowl guarantees long, maintenance-free use and significantly extends the service life of the chimney cowl. Regardless of the direction and strength of the wind, the base always sets with its direction, thereby covering the chimney opening.The chimney cowl is an ideal solution when there is no stabilized chimney draft or it is too small, and with unfavorable terrain configuration, strong and frequent winds.
Learn More