Search results for 'DRAGON DR BS'

Professional submersible pump compliant with the most demanding European standards, intended for customers using drainage pumps in their professional work. Due to the use of a closed impeller, the pump can pump clean and slightly contaminated water. With its 1500 W motor, 3-inch outlet, and maximum flow of up to 1400l/min, as well as a relatively low weight, the pump can be used to drain flooded houses, premises and garages during minor and major flooding. The pump is equipped with a float switch for operation control and thermal protection mounted in the motor winding.

Submersible pumps designed for pumping sewage, dirty water, and water from flooded premises. The pumps are equipped with float switches for automatic pump control. Threaded outlet connection and a set of adapters provide connection of the discharge hose with a hose clamp or fast-connection coupling. WQF pumps are equipped with thermal protection mounted in the motor winding. The motor housing is made of AISI304 stainless steel, and the impeller is made of grey cast iron.

A series of professional submersible pumps with mixing system, designed for customers who need a strong and reliable product in their professional work. These pumps are widely used in sewage pumping stations. MWQ pumps are designed for pumping raw sewage from pumping stations where dense sludge may be deposited. The pumps have a special additional external rotor (agitator) for mixing and splitting heavy sludge. Materials used guarantee long-term and faultless operation. Motor shaft is made of stainless steel. Motor chamber is sealed with a double SiC/ SiC mechanical seal. The pump uses a multi-channel impeller for pumping large diameter impurities. All MWQ pumps are suitable for installation with a guide rail system. The motors have Class F winding insulation and single-phase versions are additionally equipped with thermal protection mounted in the winding. The pumps have bearings manufactured by NSK in Japan. Flanges for connecting pipes or fast-connection. The pumps are available as single-phase 230V ~/ 50Hz versions with a float switch, and 3-phase 400V ~ 3 / 50Hz version. The pumps can be supplied with guide rail systems for installation in pump stations. The guide rail system is sold separately.

Submersible pumps designed for pumping clean and slightly contaminated water.Due to the top quality stainless steel design, the pumps ensure long-term and reliable operation. The motor is equipped with thermal protection mounted in the winding.The pumps have a cooling jacket so that they do not have to be fully submerged.Compared to other SWQ pumps, the F marked pump provides a very high flow of up to 830 l/min. All pumps except the SWQ180 have impellers made of stainless steel and are equipped with float switches for operation control. Due to small size (12 cm diameter), the SWQ180 pumps can be used to extract water from small, narrow wells. The pumps do not have a float.

The deep well screw pump is ideal for use in single and multi-family houses, recreational plots, farms, production plants, it is perfect for irrigation. Designed for pumping water from drilled deep water intakes, ring wells and free-standing tanks. Learn More

Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.

Submersible Sludge Pump is designed for dewatering works in the construction industry, dewatering flooded buildings and rooms, taking water from ponds, lakes and rivers. All places, where there is risk of considerable sand content in pumped water.

Group of multi-stage self-priming centrifugal pumps designed for pumping of clean cold water from own intakes and for increasing pressure.The pumps are equipped with the Venturi tube system for increased suction capacity. MHI pumps are available in two variants: with stainless steel impellers (INOX design) or with noryl impellers. All pumps have a stainless steel body. Due to low-noise operation, the pumps can be installed inside the houses. The pumps are equipped with thermal protection mounted in the motor winding.

The SPA pump is designed for circulation or filtration of swimming pools, spas, whirlpool bathtubs and hot tub spas. The JA pump can also be used in pools containing sea water, e.g. fish farms. The pump motor is equipped with thermal protection and provides exceptionally low-noise operation and low vibrations. The JA50 pumps are widely used by SPA manufacturers.