Submersible Pump IPC 550

A submersible plastic pump designed for pumping clean and slightly contaminated water. IPC 550 pump has a threaded outlet connection with a built-in non-return valve to which 3 different adapters can be attached in order to adapt the outlet diameter to individual requirements. The pumps have a cooling jacket so they do not have to be fully submerged. After removing the suction filter, water can be pumped-off down to 1 mm. Pumping can start at above 5 mm water level. Like IPE and IPK pumps, the IPC 550 pump is equipped with an integrated float switch so it can be used in narrow wells. An additional advantage is the option to select the automatic or manual operating mode. Like IPE and IPK pumps, all pumps are supplied with thermal protection mounted in the motor winding.

APPLICATION:
Draining flooded rooms, swimming pools, wells. The pumps can be used in waterholes and for obtaining water from intakes with water surface close to the ground level. The pumps can also be used for pumping rainwater.

Operating conditions:
• Maximum liquid temperature 35°C
• Maximum ambient temperature 40°C
• Thermal protection: yes
• Class B Insulation
• Operating mode - continuous
• Protection - IP68

Materials:
• IP - Housing: Technopolymer
• Shaft and rotor: stainless steel AISI 304
• Impeller: Noryl

• Connections: 3/4" , 1"
• Mechanical seal: ceramics/carbon
• Rotational speed of the electric motor: 2850RMP
• Electrical cable - 10m H07-RN