4" SKM deep well pump

3”SKM 100
3” (75 mm diameter) multi-stage deep well peripheral pump. Due to the small diameter, the pump can be installed in well with 25 cm diameter pipes. Depending on
the customer requirements, the pump can be equipped with standard 15 or 20 m cable with a plug. Due to the capacitor built into the motor, the pump is ready for installation immediately after unpacking. The pump is supplied with thermal protection mounted in the motor winding.

4”SKM 100
4” (98 mm diameter) deep well peripheral pumps. Thepumps are designed for minimum 4-inch wells. Durable materials such as stainless steel and brass have been used in the production of pump impellers. The pumps are available with the following power cables terminated with a plug:
4”SKM 100 – 15m / capacitor built into the motor

4”SKM 100 – 20m + control box
4”SKM 150 – 15m / capacitor built into the motor

4”SKM 150 – 20m + control box
4”SKM 200 – 15m / capacitor built into the motor

Depending on the version, the 4”SKM pumps have thermal protection mounted in the motor winding or in the control box. The pumps are available as single-phase 230 V ~ /50Hz versions - 4 SKM, and 3-phase 400 V ~ 3/50 Hz versions - 4 SKT.

APPLICATION:
Supply of water to single-family houses and holiday houses. Irrigating gardens.

Operating conditions:
• Maximum liquid temperature 35°C
• Maximum ambient temperature 35°C
• Class B Insulation
• Operating mode - continuous
• Protection - IP68

Materials:
• Housing: stainless steel AISI 304
• Shaft and rotor: stainless steel AISI 304
• Impeller: Brass
• Venturi tube: stainless steel
• Mechanical seal: Carbon-SIC/Sic
• Motor: oil cooling
• Rotational speed of the electric motor:2850RMP